23-030-17
Service Bulletin Details
Public Details for: 23-030-17
Hood seal torn or deformed this bulletin involves replacing the hood seals due to damage and/or being torn. The customer may experience the hood seal drooping due to cracks and tears on the hood seal.
Models from 2017
2017 DODGE CHALLENGER |
Models from 2016
2016 DODGE CHALLENGER |
Models from 2015
2015 DODGE CHALLENGER |
NUMBER: 23-030-17 GROUP: 23 - Body DATE: June 24, 2017 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC. THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 17-051. ALL APPLICABLE UN-SOLD RRT VIN’s HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE UN-SOLD VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. FOR VEHICLES NOT INCLUDED IN THE RRT VIN LIST, APPLICATION OF THIS SERVICE BULLETIN TO SOLD UNITS IS BASED UPON THE CUSTOMER EXPERIENCING THE SYMPTOM/CONDITIONS. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY. SUBJECT: Hood Seal Torn or Deformed OVERVIEW: This bulletin involves replacing the hood seals due to damage and/or being torn. MODELS: 2015 - 2017 (LA) Dodge Challenger NOTE: This bulletin applies to vehicles within the following markets/countries: EMEA/(Gulf Coast Countries) NOTE: This bulletin applies to vehicles built on or before May 12, 2017 (MDH 0512XX) equipped with Middle East Equipment Group (Sales Code ABD). SYMPTOM/CONDITION: The customer may experience the hood seal drooping due to cracks and tears on the hood seal. DIAGNOSIS: If a customer’s VIN is listed in VIP or your RRT VIN list, perform the repair. NOTE: The hood seal should be replaced automatically if part of the RRT. 23-030-17 -2- PARTS REQUIRED: Qty. 1 11 Part No. 68051392AB 06500898 Description Hood Seal Retainer, M4.95x25 Rivet REPAIR PROCEDURE: 1. Open hood and remove both upper close out panels (Fig. 1) . Fig. 1 Front View of Vehicle 1 - Upper Close Out Panels -3- 23-030-17 2. Remove all hood seal retainers (plastic rivets) and the hood seal (Fig. 2) . Replace with new hood seal and retainers listed in Parts Required. Fig. 2 View of Hood Seal and Retainers (shown with upper close out panels in place) 1 - Hood Seal 2 - Hood Seal Retainers (Plastic Rivets) POLICY: Reimbursable within the provisions of the warranty. TIME ALLOWANCE: Labor Operation No: 23-51-03-95 Description Skill Category Amount Seal, Hood, Body Mounted - Replace (1 - Semi-Skilled) 6 - Electrical and Body Systems 0.2 Hrs. FAILURE CODE: ZZ Service Action