13TL-12

Service Bulletin Details

Public Details for: 13TL-12

13tl-12 dt12 detroit transmission service tools


- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -

Models from 2019
2019 FCCC XCM
Models from 2018
2018 FCCC XCM
Models from 2017
2017 FCCC XCM
Models from 2016
2016 FCCC XCM
Models from 2015
2015 FCCC XCM
Models from 2014
2014 FCCC XCM
Models from 2013
2013 FCCC XCM
Models from 2012
2012 FCCC XCM
Models from 2011
2011 FCCC XCM
Models from 2010
2010 FCCC XCM
Models from 2009
2009 FCCC XCM
Models from 2008
2008 FCCC XCM
Models from 2007
2007 FCCC XCM
No.: 13 TL-12
August 16, 2013
TO:
Distributors Only
FROM:
Service Operations
SUBJECT:
DT12 Detroit Transmission Service Tools
GENERAL INFORMATION
The following DT12 Detroit Transmission service tools have been made available for
distributors to order. These are necessary in the event of engine removal or clutch
replacement.
NOTE: These tools are used ONLY to aid in the removal and installation of the
DT12 transmission in order to work on and / or remove the Detroit engine and does
not represent approval to perform DT 12 transmission or clutch warranty repairs
or otherwise. Warranty submissions on the DT 12 transmission and clutch will be
denied warranty reimbursement.
.
Tools can be ordered though Paragon using a DDE supplier prefix.
Tool Part Number
DDE W403589051500
Tool
Description
Pilot Bearing
Drift
Image
Usage
Installation of
pilot bearing
DDE W950589006100
Clutch Disk
Alignment
Clutch disk
installation
DDE W715589013700
Input Shaft
Pliers
Rotating input
shaft for
transmission
installation
ADDITIONAL INFORMATION
Ordering Information – Tools can be ordered though Paragon using DDE supplier prefix
DDE W403589051500 Pilot Bearing Drift
DDE W950589006100 Clutch Disk Alignment
DDE W715589013700 Input Shaft Pliers
Refer to Detroit Transmission Manual (DDC-SVC-MAN-0140) for individual tool usage
and procedures. If there are any questions or concerns about the use of these tools, call
the Detroit Customer Support Center. Do not attempt to modify these tools in any way;
doing so may result in damage to the tool or transmission assembly.
CONTACT INFORMATION
Please contact the Detroit Customer Support Center at 855-253-0428 or email
[email protected] if you have any questions.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.