TSB180056-050820
Service Bulletin Details
Public Details for: TSB180056-050820
This technical service bulletin describes the verification and resolution of an issue in which the insite electronic service tool image regeneration history log is incorrectly recoring "maximum diesel particulate filter intake temperature."
- 9999 -
Models from 9999
9999 CUMMINS B6.7 |
9999 CUMMINS L9 |
9999 CUMMINS X15 |
INSITE Electronic Service Tool Image Aftertreatment Regeneration Temperature History... Page 1 of 2 Technical Service Bulletin Technical Service Bulletin: Released Date: 08-May-2018 TSB180056 INSITE Electronic Service Tool Image Aftertreatment Regeneration Temperature History Incorrect INSITE Electronic Service Tool Image Aftertreatment Regeneration Temperature History Incorrect Warranty Statement The information in this document has no effect on present warranty coverage or repair practices, nor does it authorize TRP or Campaign actions. Contents Product Affected • • • • • • • X15 CM2350 X114 X15 CM2350 X116 L9 CM2350 L116 L9 CM2350 B120C B6.7 CM2350 B121 B6.7 CM2350 B141 B6.7 CM2350 B136C Issue INSITE™ electronic service tool Image Regeneration History Log, located in Advanced ECM Data: Aftertreatment History, is incorrectly recording “Maximum Diesel Particulate Filter Intake Temperature”. The recorded value is lower than actual temperature and is not to be used to diagnose effectiveness of the aftertreatment diesel oxidation catalyst (DOC). Resolution An engine control module (ECM) calibration code is being developed to resolve this https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2018/tsb180056.html 6/1/2018 INSITE Electronic Service Tool Image Aftertreatment Regeneration Temperature History... Page 2 of 2 issue. Document History Date 2018-5-8 Details Module Created Last Modified: 08-May-2018 https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2018/tsb180056.html 6/1/2018