ITB18-020

Service Bulletin Details

Public Details for: ITB18-020

2019 qx50; service information for dtc P11AB service information the applied vehicle has a diagnostic trouble code (dtc) that can be stored if power is interrupted to the variable compression ratio control module circuit under certain c


- 2019 -

Models from 2019
2019 INFINITI QX50
Classification:
Reference:
Date:
EC18-014
ITB18-020
May 24, 2018
2019 QX50; SERVICE INFORMATION FOR DTC P11AB
APPLIED VEHICLES:
2019 QX50 (J55)
SERVICE INFORMATION
The Applied Vehicle has a Diagnostic Trouble Code (DTC) that can be stored if power is interrupted to the
Variable Compression Ratio Control Module Circuit under certain conditions.
DTC P11AB – (VCR control module circuit) can be stored if:

12 volt power is interrupted while the ignition is ON, or up to 3 minutes after the ignition was turned
OFF
 Refer to the Electronic Service Manual (ESM). Search precautions for removing battery in Title
Search for further information.

Vehicle battery has low voltage

Vehicle battery is incorrectly disconnected
 Refer to the ESM. Search precautions for removing battery in Title Search for further
information.

ECU is disconnected before properly disconnecting the 12 volt battery
In these cases DTC P11AB will be accompanied by other DTCs related to low voltage or connection codes.
If P11AB is stored during one of the above conditions, with DTCs that are related to low voltage or connection
issues, P11AB and related DTCs can be erased with no further action.
NOTE: If DTC P11AB is stored by itself, refer to the ESM for further diagnostic information.
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/1


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.