5NP-U8N3D-07

GROUP
NUMBER
CAMPAIGN
DATE
Technical Service Bulletin
SUBJECT
:
18-01-022
MODEL(S)
JUNE, 2018
ELANTRA 2.0L
(ADa)
V - R I B B E D B E L T INSPECTION/REPLACEMENT
(SERVICE CAMPAIGN T3A)
 IMPORTANT
*** Dealer Stock and Retail Vehicles ***
Dealers must perform this campaign on all affected vehicles prior to customer retail delivery and
whenever an affected vehicle is in the shop for any maintenance or repair.
When a vehicle arrives at the service department, access Hyundai Motor America's "warranty
vehicle information" screen via WEBDCS to identify open campaigns.
Description: On certain 2018MY Elantra 2.0L (ADa) vehicles, the V-ribbed belt may become frayed.
Follow the procedure outlined in this bulletin to inspect and if necessary replace the V-ribbed belt.
Applicable Vehicles: Certain 2018MY Elantra (ADa) 2.0L HMMA built vehicles (1st 3-digit VIN: 5NP)
Parts Information:
Part Name
Description
V-RIBBED
BELT
Part Number
Quantity
Note
25212-2E300
1*
*Replace only if the
inspection result is
“NO GOOD”.
Warranty Information:
OP CODE
OPERATION
OP TIME
80CA05I0
V-Ribbed Belt Inspection
0.2
Causal Part
Nature Cause
25212-2E300
A33
ZZ4
80CA05R0 V-Ribbed Belt Inspection and Replacement
0.3
NOTES:
 Submit Claim on Campaign Claim Entry Screen
 If the lot code was “8318T9ML” (NO GOOD) and V-ribbed belt replacement was necessary, then a
picture including the image of the lot code from the replaced part must be attached to the claim.
 The replaced V-ribbed belt will receive a warranty parts collection notice.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
V-RIBBED BELT INSPECTION/REPLACEMENT (SERVICE CAMPAIGN T3A)
Inspection Procedure:
1.
Open the hood and check the lot code
information on the V-ribbed belt.
LOT Code Info
NOTICE
If the lot information is not visible,
then quickly START and STOP the
engine until the lot information
portion becomes visible.
2.
Compare the lot code to determine between GOOD and NO GOOD.
NOTICE
NO GOOD (Lot Code “8318T9ML”)
- Lot Code is 8318T9ML is NO GOOD.
- All other Lot Codes are GOOD.
3.


If the lot code is not “8318T9ML” (GOOD), then no further work is needed.
If the lot code is “8318T9ML” (NO GOOD), then replace the V-ribbed belt following the
service procedure in the Shop Manual.
o Refer to the Shop Manual section for Elantra (Ada) > 2018 > G 2.0 MPI > Engine
Mechanical System > Drive Belt > Repair Procedures
TSB #: 18-01-022
SUBJECT:
Page 2 of 2