PIP5373B
Service Bulletin Details
Public Details for: PIP5373B
This preliminary information communication provides the technician with steps on how to program an engine control module when getting a service programming system error code e4491 or e4423. In some cases techline customer support center may
Models from 2018
Models from 2017
Models from 2016
Bulletin No.: PIP5373B Published date: 06/11/2018 Preliminary Information PIP5373B Program ECM Error E4491/E4423 Models Brand: All Model: All Model Years: 2016 - 2019 VIN: from All Engine: to All All Transmissions: All Supersession Statement This PI was superseded to update Condition/Concern and Model Years. Please discard PIP5373A. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition / Concern Program ECM/TCM Error E4491/E4423. The ECM/TCM may seem to be locked up. During this step of programming an attempt is being made to execute the new 5 byte seed and key logic for proper authorization to unlock the box. However the DLL is not communicating with the TIS server properly resulting in a General DLL error. Utility File continues to the next step but the command is rejected because the ECU is still locked. Recommendations / Instructions Corrective action: 1) Log out of Tis2Web 2) Go into c:\users\\sps\ and delete the spsnativelibs jar folder 3) Then go into the Control Panel (Control Panel >>> Programs and Features >>> Add/Remove Programs) Then UNINSTALL the entry called Tis2Web IVCS5B COM Proxy 4) Restart the PC - make sure user has Administrator Rights 5) Log into tis2web and launch SPS. The IVCS5b com proxy should reinstall If this does not resolve the concern Please contact the Techline Customer Support Center (TCSC) for assistance at: TCSC: 1-800-828-6860 English or 1-800-503-3222 French, 8am-8pm (EST) Monday through Saturday Information required when calling: • Dealer BAC • Call back phone number (close proximity to the Techline PC and vehicle) • VIN • Description of service procedure being performed, (ex: bulletin, service document) • Error messages if any Note: Using a Techline PC and programming device that meets the minimum speci cations is essential to successful programming and required for full support. This particular issue is NOT related to an ECU. It is related to PC/TIS service tool issue. Note: This issue is under review and this PI may be converted to a Bulletin if new information is available. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. © 2018 General Motors. All Rights Reserved.