122-S4R2X-07
Service Bulletin Details
Public Details for: 122-S4R2X-07
Subject: outside temperature sensor symptom: the outside temperature display shows implausible values. Cause: the outside temperature display can show implausible values because the wire harness for the outside temperature sensor is too
- 2018 - 2017 - 2016 - 2015 - 2014 -
Models from 2018
2018 PORSCHE MACAN |
Models from 2017
2017 PORSCHE MACAN |
Models from 2016
2016 PORSCHE MACAN |
Models from 2015
2015 PORSCHE MACAN |
Models from 2014
2014 PORSCHE MACAN |
Service Technical Information 38/18 ENU 9168 9 Symptom In Vehicle Interior - Outside Temperature Display Implausible: Reworking wire harness for outside temperature sensor (SY 38/18) Revisions: Revision 1 — June 27, 2018 Changes/additions: Part number corrected: 958.606.838.10 Model Year: As of 2014 up to 2018 Model Line: Macan (95B) Subject: Outside temperature sensor Symptom: The outside temperature display shows implausible values. Cause: The outside temperature display can show implausible values because the wire harness for the outside temperature sensor is too long. Remedial Action: In the event of a customer complaint, replace the outside temperature sensor and rework the the wire harness using a clamp and tie-wrap. Date of Introduction: The branch of the wire harness is adapted during production from model year 2019 onwards. Parts Info: 958.606.838.10 – NEW – Work Procedure: 1 Tie-wrap holder Preliminary work: 1.1 Remove front apron. Workshop Manual '631519 Removing and installing front apron' 1.2 Swivel flap of the air guide (right) Air guide flap (right) -1- forward. AfterSales Jun 27, 2018 Page 1 of 3 9 Service 9168 ENU Technical Information 38/18 Air guide flap (right) Information In the event of a complaint, also replace the outside temperature sensor. Workshop Manual '916819 Removing and installing outside temperature sensor' 2 Rework branch of wire harness for outside temperature sensor: 2.1 Secure tie-wrap holder Branch of wire harness for outside temperature sensor -1- to the right flap of the air guide as shown. 2.2 Secure electric line Branch of wire harness for outside temperature sensor -2- for the outside temperature sensor with a tie-wrap (958.606.838.10 – Branch of wire harness for outside temperature sensor -3-). Branch of wire harness for outside temperature sensor 3 Subsequent work: 3.1 Swivel flap of the air guide (right) back until it engages securely. 3.2 Install front apron. Workshop Manual '631519 Removing and installing front apron' Jun 27, 2018 Page 2 of 3 AfterSales Service Technical Information 38/18 ENU 9168 9 End of action required. Invoicing: The work involved is invoiced under the labor operation: APOS Labor operation 91684900 Reworking outside temperature sensor I No. For invoicing and documentation using PQIS, enter the following coding: Location (FES5) 91680 Outside temperature sensor Damage type (SA4) 1613 Does not work at times References: Workshop Manual '631519 Removing and installing front apron' Workshop Manual '916819 Removing and installing outside temperature sensor' Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2018 Porsche Cars North America, Inc. AfterSales Jun 27, 2018 Page 3 of 3