A431829 2051336-

Service Bulletin Details

Public Details for: A431829 2051336-

This bulletin contains repair instructions for dtc B200Ff0.


- 2019 - 2018 - 2017 -

43 Suspension control module is malfunctioning
43 18 29 2051336/1 May 22, 2018.
Model(s)
Year
VIN Range
Vehicle-Specific Equipment
A4, A4
allroad, S4,
A5, A5
Cabriolet,
S5, and S5,
Sportback
2017 - 2019
All
Suspension with electronic damper control
Condition
Customer states:
 The warning lamp for damper control on instrument cluster is on.
Workshop findings:
The following DTC may be stored in the drivetrain control module, J775 (address word 0074) or in the electronic
damping control module, or J250 (address word 0014):
 DTC B200FF0 (internal malfunction) with symptom code 4456587.
Technical Background
Not applicable.
Production Solution
Not applicable.
Service
The DTC does not affect the handling characteristics of the vehicle. Delete the DTC and perform suspension
basic settings.
Perform GFF to ensure there are no other DTCs stored in the control module.
Note:
Parts replacement does not solve this issue. Claims for replaced parts will be subject to review.
Page 1 of 2
© 2018 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If vehicle is outside any warranty, this Technical Service Bulletin is
informational only.
Service Number:
4316
Damage Code:
0040
Diagnostic Time:
GFF
0150 0000
Time stated on
diagnostic
protocol
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Claim Comment:
As per TSB #2051336/1
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Additional Information
All parts and service references provided in this TSB (2051336) are subject to change and/or removal.
Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check
the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair.
©2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 2 of 2
© 2018 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.