2018 TT-TTS-TTRS
Service Bulletin Details
Public Details for: 2018 TT-TTS-TTRS
Reminder section: changed gff statement to the following: all pdi function tests must be run in guided fault finding (gff) using pdi total function test plan only.
- 2018 -
Models from 2018
2018 AUDI TT |
2018 AUDI TT ROADSTER |
2018 AUDI TTS |
2018 TT Coupe & Roadster/TTS/TT RS Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by an Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Interior Check Elsa for open campaigns and updates Verify operation of all seat belts and latches Deactivate vehicle transport mode* This step must be performed with the engine off, and ignition on Check operation of window, lock, and seat controls* Set adaption channel to enable CD Ripping using Guided Functions (if equipped with NAV)* Inspect mirrors for proper operation* Check rear view mirror operation* Verify operation of all interior lights Set service reminder* Verify operation heated/ventilated seats Perform any open campaigns* Verify proper operation of climate control* Inspect operation of all power outlets* Exterior Check all key buttons and features* Verify operation of front Passenger Occupant Detection System Inspect exterior for damage, dings, dents and surface scratches Settings Verify operation of MMI® touch pad (if equipped) Lighting and Windshield Test exterior lighting functions Set Time source setting to “GPS” and set Auto daylight savings time to “on”* Test windshield washers Set Time to “Automatic setting” and “Automatic time zone” Verify and set language and measurement units* Trunk Inspection Verify trunk is operational Verify operation of emergency release handle Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Verify tool kit is installed securely in luggage compartment Verify inflatable repair kit and compressor are present (TT RS only) Set spare tire pressure* Check battery clamps for proper torque* Effective 7-11-2018-US Version 1.3 Verify Speech Dialog System is operating* Set “Entertain. Fad.” in Parking aid to an audible level* Set “Music volume while parking” to 6 lines* Set dealership location in navigation (if equipped)* Turn off Manual Speed Warning (if equipped)* Media / Radio / SAT Verify operation of AMI or aux. input (if equipped) Verify operation of CD/DVD player PRE-DELIVERY INSPECTION (PDI) | 1 2018 TT Coupe & Roadster/TTS/TT RS Audi Pre-Delivery Inspection Media / Radio / SAT (continued) Driving Performance (continued) Insert SD card and test function of all slots Verify transmission operation, including shift paddles (if equipped) Verify HD Radio is turned “off”* Test drive vehicle applying brakes several times* Audi connect® (USA ONLY) (if equipped) Verify rear spoiler functionality (if equipped) Connect the dealer demo SIM card to verify system connects to mobile network* Check steering/tire alignment Verify Audi connect® Information Packet is present (if equipped) Verify quality of radio reception in AM/FM/SiriusXM® bands Verify system connects to mobile network (if equipped). Review TSB 2042942 for additional information Driver Assistance Verify cruise control Turn on the wireless network (if equipped)* Verify Audi side assist functionality (if equipped) Turn on the Wi-Fi® hotspot (if equipped)* Verify operation of parking system* Check Wi-Fi® hotspot visibility. No data available at PDI (if equipped)* Activate NAV and follow directions back to dealership (if equipped) Check Wi-Fi® hotspot functionality (if equipped)* Enable Google EarthTM* Convertible Functionality (if equipped) Test operation of power folding top* On-Hoist Inspection Verify convertible top manual closing tools are present Remove transport suspension blocks (follow ELSA instruction) Check steering, boots, brake system, hoses, tires and wheels for damage Check underside of vehicle for fluid leaks and loose components Check for squeaks, rattles and wind noise Post-Road Test Inspection Interrogate fault memory and upload Diagnostic Log to GFF Paperless Server Perform a battery test* Install wheel bolt covers and center caps as supplied* Check service interval and verify correct interval is displayed Inspect wheel bolts for proper torque* Check engine oil level* Install wheel locks (if equipped) Check all fluid levels and top off if necessary Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Ensure the yellow tire pressure tag is installed on the steering wheel Apply Inventory Maintenance Sticker** Driving Performance Check horn operation Install showroom charger to ensure battery remains charged at all times** Verify hold and release of electronic parking brake Verify engine performance and acceleration* Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 7-11-2018-US Version 1.3 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 2