TJ33617

VOLVO CAR
SERVICE AND PARTS BUSINESS
Technical Journal
TITLE:
Front seat heater, function control
REF NO:
ISSUING DEPARTMENT:
CAR MARKET:
TJ 33617.1.0
Technical Service
United States and Canada
PARTNER:
ISSUE DATE:
STATUS DATE:
3 US 7510 Volvo Car USA
2018-07-03
2018-07-11
FUNC GROUP:
FUNC DESC:
8527
Electrical heating
Page 1 of 8
“Right first time in Time”
Attachment
File Name
TJ 33617.pdf
File Size
2.4450 MB
Vehicle Type
Type
Eng
Eng
Desc
Sales
Body
Gear
Steer
234
235
236
238
246
256
Model Year
Plant
2017-9999
2017-9999
2017-9999
2018-9999
2018-9999
2016-9999
Chassis range
0000350-0999999
0000160-0999999
0000098-0999999
0000161-0999999
0000389-0999999
0000561-0999999
Struc Week
Range
201617-999952
201624-999952
201646-999952
201646-999952
201717-999952
201505-999952
CSC Customer Symptom Codes
Code
UW
Description
Front seat/Seat heating does not work or too hot
VST Operation Number
VST Operation Number
98714-2
Description
Heater pad front seat fault trace acc. to TJ33617
Produced in the USA and available as an electronic document. Hard copy documents are printed in USA on recycled paper containing
a minimum of 50% wastepaper and 10% post-consumer waste.
© 2018 VOLVO CAR USA, LLC
Technical Journal 33617.1.0
DTC Diagnostic Trouble Codes
Text
DESCRIPTION:
If the front seat heaters do not work, check the heating grid wiring by measuring, follow instruction
under Service.
SERVICE:
Measure according to attached instruction.
VEHICLE REPORT:
Yes, please submit a Vehicle Report if the service solution described in this TJ has no effect. Use
concern area “Vehicle Report” and sub concern area “Support not needed”, use function group 8527.
To view TJ attachment continue to next page. This TJ has one attachment.
Page 2 of 8
2018-07-11
Volvo Car Customer Service
Title
Front seat heater
Action
Issue
1
Product fix
Date
2018-06
Reason
First issue
Affected vehicles
Model year Model
2017
S90 (17-)
2018,
2019
S90L
2017, 2018,
2019
2017, 2018,
2019
2018, 2019
2016, 2017,
2018, 2019
V90 (17-)
V90 Cross Country
XC60 (18-)
XC90 (16-)
Description
MULTIMETER (DIGITAL)
Special tools
Part No.
951 0060
TJ Instruction VCC-512761-1
Page
1(6)
Operation number:
98714-2
TJ Instruction VCC-512761-1
Page 2 ( 6 )
Removal
Color symbols
Note! This colour chart displays (in colour
print and electronic version) the importance
of the different colours used in the images
of the method steps.
1 . Used for focused component, the
component with which you will do
something.
2 . Used as extra colors when you need to show
or differentiate additional parts.
3 . Used for attachments that are to be
removed/installed. May be screws, clips,
connectors, etc.
4 . Used when the component is not fully
removed from the vehicle but only hung to
the side.
5 . Used for standard tools and special tools.
6 . Used as background color for vehicle
components.
TJ Instruction VCC-512761-1
Page 3 ( 6 )
Note! Orientation view
TJ Instruction VCC-512761-1
Page 4 ( 6 )
Check
Check the voltage.
Special Tool: T9510060, MULTIMETER
(DIGITAL)
Check the value.
YE = Yellow
BU = Blue
If the measurement results give normal values,
continue to the section Checks, below.
Check
Disconnect the connector.
TJ Instruction VCC-512761-1
Page 5 ( 6 )
Check the control unit.
Special Tool: T9510060, MULTIMETER
(DIGITAL)
Set multimeter for diode measurement.
Connect red probe to the terminals black cable.
Connect black probe to the terminals yellow
cable.
Check the value.
YE = Yellow
BK = Black
If the measurement results give normal values,
continue to the section Checks, below.
If the result of the checking procedure is not
OK, the component must be replaced with a
new component.
Check
Connect the connector.
TJ Instruction VCC-512761-1
Page 6 ( 6 )
Check the LIN communication.
Start the engine.
Special Tool: T9510060, MULTIMETER
(DIGITAL)
Set multimeter for VAC measurement.
Check the value.
GN = Green
BU = Blue
If the measurement results give normal values,
continue to the section Checks, below.
Check
Check the heating coil.
Start the engine.
Special Tool: T9510060, MULTIMETER
(DIGITAL)
Set multimeter for VDC measurement.
Check the value.
Correct heaters: The voltage shall normally be 5
V (DC) when the heating is active and 0 V (DC)
when the heating is off.
Incorrect value of heating element backrest
cushion: Always 7V
Incorrect value of heating element cushion:
Always 0 V (DC).
BU = Blue
BK = Black
If the result of the checking procedure is not
OK, the component must be replaced with a
new component.
Installation
To install, reverse the removal procedure.