T-TT-0415-16
Service Bulletin Details
Public Details for: T-TT-0415-16
Tt: sienna sliding door not moving/stuck due to cable binding and/or cable mis-routing at central hinge. This applies to sliding door cables without damage to the coating (fraying/cracking/breaking) present. Please look and verify condit
Models from 2010
2010 TOYOTA SIENNA |
Models from 2009
2009 TOYOTA SIENNA |
Models from 2008
2008 TOYOTA SIENNA |
Tech Tip T-TT-0415-16 September 07, 2016 Subject Market 08-10MY Sienna Sliding Door Cable Binding (without coating damage) and Center Hinge Cable Mis-routing. USA Service Category Section Vehicle Exterior Door/Hatch Applicability 08-10 MY Sienna APPLICABLE VEHICLES 2008-2010 Sienna CONDITION Sienna Sliding door not moving/stuck due to cable binding and/or cable mis-routing at central hinge. This applies to sliding door cables without damage to the coating (Fraying/cracking/breaking) present. Please look and verify condition of the cable coating before proceeding. Refer to attached file for details of both cable conditions. 08-10MY Sienna Cable Conditions.pdf RECOMMENDATIONS This issue is currently under investigation. • Please create a TAS case and contact Technical Assistance (TAS) to submit details on any vehicle identified matching the condition described in this document prior to repair. • If you are attempting to contact TAS on a weekend or TMS holiday, continue with diagnosis and submit the requested information on the next available work day. Retain all replaced parts and technician notes for possible review with TMS TAS Product Engineer. LINK REFERENCES This Tech Tip does not contain any link references Expires on Ver. 2.7 01/01/2016 T 12/07/2016 © 2016, Toyota Motor Sales, USA Page 1 of 1