A901896 2048926-
Service Bulletin Details
Public Details for: A901896 2048926-
Models from 2019
2019 AUDI A4 |
2019 AUDI A4 ALLROAD |
2019 AUDI A5 |
2019 AUDI A5 CABRIOLET |
2019 AUDI Q5 |
2019 AUDI Q7 |
Models from 2018
2018 AUDI A4 |
2018 AUDI A4 ALLROAD |
2018 AUDI A5 |
2018 AUDI A5 CABRIOLET |
2018 AUDI Q5 |
2018 AUDI Q7 |
Models from 2017
2017 AUDI A4 |
2017 AUDI A4 ALLROAD |
2017 AUDI Q7 |
Models from 2016
2016 AUDI A4 |
2016 AUDI A4 ALLROAD |
2016 AUDI Q7 |
90 Various messages displayed, DTCs B200FF1 and/or B200FF2 stored in the camera control module 90 18 96 2048926/4 August 23, 2018. Supersedes Technical Service Bulletin Group 90 number 18-95 dated August 16, 2018 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment A4, Q7 2016 - 2019 All With multifunction camera A5, A5, Cabriolet, and Q5 2018 - 2019 All With multifunction camera Condition REVISION HISTORY Revision Date Purpose 4 - Revised header data (Added MY19 and revised for specific software versions) Revised Production Solution (Added solution) Revised Service (Added SVM update instructions) 3 08/16/2018 Revised Warranty (Updated Labor Operation) 2 07/10/2018 Revised title Revised Warranty (Updated Labor Operations) Revised Required Parts and Tools (Updated part numbers) Customer statement: In the driver information system (DIS) one or several of the following messages are displayed: Audi pre sense: malfunction. Traffic sign detection: malfunction. Adaptive cruise control with congestion assistant is not available. Audi active lane assist: currently not available. Workshop findings: One of the following DTC(s) is stored in the camera control module, R242 (address word 00A5) as either static or sporadic: DTC B200FF1 (internal malfunction). DTC B200FF2 (internal malfunction). Page 1 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Background During its start phase the camera recognizes a malfunction in the internal communication. Production Solution Improved software addressed the condition (DTC B200FF2). Service 1. If only DTC B200FF1 (internal malfunction) is logged, then replace the camera control module. 2. If both DTCs B200FF1 and B200FF2 are logged, then replace the camera control module. 3. If only DTC B200FF2 (internal malfunction) is logged, proceed as follows: Update the camera control module with SVM to SW0044 via SVM code A5A002. Note: Claims with a replaced camera control modules which only had the DTC B200FF2 once may be denied. SVM Update Instructions 1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions. 2. Update the Camera Control Module (00A5) using the SVM action code as listed in the table below, if necessary: Model Old Software Part Number Old Software Version New Software Part Number New Software Version SVM Code Input (or higher) A4/A5 8W0907217A 0030 8W0907217B 0042 8W0907217B 0044 A5A002 * 4M0907217D 0044 A5A002 0042 80A907217 0044 A5A002 4M0907217B Q7 4M0907217C 4M0907217D Q5 80A907217 Page 2 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Warranty Claim Type: 110 up to 48 Months/50,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9638 Damage Code: 0040 Labor Operations: All Models: Software Update 0151 0000 Time stated on diagnostic protocol (Max 70 TU) Camera Driver Assist Sys Adjust 9638 1550 40 TU Preparation Driver Assist Calibration 9092 0050 30 TU Vehicle front + rear checked 4495 0100 70 TU Camera Driver Assist Sys replaced 9638 5550 60 TU Inside mirror remove and reinstall 6827 1900 20 TU 9638 5500 110 TU Camera Driver Assist Sys replaced 9638 5500 60 TU 2 Headlight assembly adjust 9415 1600 20 TU Or Or Or 2 Headlight assembly adjust 9415 1601 (LED Only) 30 TU Camera Driver Assist Sys replaced 9638 5550 20 TU Inside mirror removed + reinstalled 6827 1900 20 TU A4 and A5: A5 Cabriolet: Camera Driver Assist Sys replaced Q5: Q7: Page 3 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Diagnostic Time: Claim Comment: 2 Headlight assembly adjust 9415 1600 20 TU Or Or Or 2 Headlight assembly adjust 9415 1601 (LED Only) 30 TU GFF 0150 0000 Time stated on diagnostic protocol (Max 100 TU) Road test prior to service procedure No allowance 0 TU Road test after service procedure 0121 0004 10 TU As per TSB #2048926/4 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Part Number Part Description Quantity See ETKA Front Camera for driver assistance programs 01 4M0955609 Silicone pad for front camera 01 See ETKA Fasteners, Bolts, Nuts and Screws as needed per the Repair Manual See ETKA/ELSA Additional Information The following Technical Service Bulletin will be necessary to complete this procedure: TSB 2011732, 00 Software Version Management (SVM), operating instructions. All parts and service references provided in this TSB (2048926) are subject to change and/or removal. ©2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 4 of 4 © 2018 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.