TSB-18-34-001

Service Bulletin Details

Public Details for: TSB-18-34-001

This is a technical service bulletin that was sent to dealers. The bulletin updates the rear suspension section of the affected service manuals to correct the tightening torque for the fastener tightening specifications table.


- 2008 -

Models from 2008
2008 MITSUBISHI LANCER 
Page 1 of 2
SUBJECT:
TORQUE UPDATES: UNITS OF TIGHTENING TORQUE &
NUMERICAL VALUE FOR REAR SUSPENSION
- SERVICE MANUAL REVISION
No:
TSB-18-34-001
DATE:
December 2018
MODEL:
2008 Lancer
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ X ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This TSB updates the Rear Suspension section of the affected Service Manual to correct the
tightening torque of the Fastener Tightening Specifications table.
AFFECTED VEHICLES
D
2008 Lancer
AFFECTED SERVICE MANUAL
D
2008 Lancer Service Manual, Group 34 - Rear Suspension
Copyright 2018, Mitsubishi Motors North America, Inc.
Continued
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi
Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
(4777)
Page 2 of 2
TSB-18-34-001
Please make the indicated changes to the 2008 Lancer Service Manual, Group 34 - Rear
Suspension -> Specifications.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.