5NP-C7T6R-02
Service Bulletin Details
Public Details for: 5NP-C7T6R-02
Some hyundai genesis vehicles may experience a haptic steering warning light with dtc code B247100 ? Vibration motor fault code set. This bulletin provides service information and the procedure to replace the haptic controller.
Models from 2016
2016 HYUNDAI GENESIS |
Models from 2015
2015 HYUNDAI GENESIS |
GROUP NUMBER BODY ELECTRICAL DATE Technical Service Bulletin 19-BE-001 MODEL(S) JANUARY, 2019 GENESIS (DH) HAPTIC STEERING CONTROLLER REPLACEMENT DTC CODE B247100 SUBJECT: Description: Some Hyundai Genesis vehicles may experience a haptic steering warning light with DTC Code B247100 – Vibration Motor Fault code set. This bulletin provides service information and the procedure to replace the haptic controller. Applicable Vehicles: 2015-2016 Hyundai Genesis (DH) Parts Information: PART NAME BEFORE AFTER CONTROLLER ASSY – S/WHL HAPTIC QTY 1EA 56183-B1000 NOTICE Ensure replacement haptic controller has S1.02 software level. Warranty Information: MODEL OP CODE OPERATION OP TIME CAUSAL PART NATURE CODE CAUSE CODE Genesis 56183F00 (DH) HAPTIC CONTROLLER REPLACEMENT 0.5 56183-B1000 I3A ZZ3 Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors, Technicians, Body Shop Manager, Fleet Repair HAPTIC CONTROLLER REPLACEMENT SUBJECT: Service Procedure: 1. Remove the negative battery terminal. NOTICE Save customer radio presets prior to detaching negative battery terminal. NOTICE Battery (-) terminal installation: 4.0 ~ 6.0 N.m (0.4 ~ 0.6kgf.m, 3.0 ~ 4.0 lb-ft). 2. Remove steering wheel per Steering Wheel removal procedure in shop manual. 3. Place steering wheel face down on a clean surface. TSB #: 19-BE-001 Page 2 of 4 SUBJECT: SUBJECT: HAPTIC CONTROLLER REPLACEMENT 4. Loosen haptic controller mounting screws. 5. Disconnect the 2 connectors, one on each side (A) and remove the haptic controller. A TSB #: 19-BE-001 Page 3 of 4 SUBJECT: HAPTIC CONTROLLER REPLACEMENT SUBJECT: 6. Install the new haptic controller (B). B NOTICE Ensure replacement haptic controller has S1.02 software level. 7. Reinstall all the removed parts in reverse order. Check for DTC codes with GDS and clear after replacement. Reset all radio presets to previous stations. TSB #: 19-BE-001 Page 4 of 4 SUBJECT: