ITB17-029b

Classification:
Reference:
Date:
EL17-011b
ITB17-029b
January 16, 2019
2017 QX30; PUSH-BUTTON IGNITION SWITCH
MID-YEAR CHANGE
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES:
2017 QX30 (H15)
SERVICE INFORMATION
A mid-year change has been made to the ignition system in the Applied Vehicles.
Vehicles produced on November 3, 2016 and after (see VIN information on page 2) are equipped with a pushbutton ignition switch instead of a turning ignition switch.
NOTE: See Figures 1 and 2 on page 2 to view images of both ignition switches.
In addition, vehicles equipped with the push-button ignition switch include the following features:




All doors automatically unlock when the ignition is turned OFF
All doors automatically lock when the vehicle speed reaches 15 MPH
Windows open/close when holding down Intelligent Key unlock/lock button
Emergency engine shut off by rapidly pushing ignition switch three (3) times
Model Year
Turning
Ignition
2017

2017.5
Push-button
Ignition
Auto Door Unlock
when Ignition
Turned OFF
Auto Door
Lock at 15
MPH
Window
Open/Close
using I-Key
Emergency
Engine Shut
Off – Push
Ignition 3X





Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe
that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/2
Vehicles built BEFORE
Vehicles built AFTER
VIN: SJK(*)H5C(**)HA 029900
VIN: SJK(*)H5C(**)HA 029899
Turning ignition
switch
Push-button
ignition switch
Figure 1
Figure 2
WARNING:

Do NOT retrofit the push-button ignition switch to vehicles produced before the application date. Please
reference Infiniti Parts and Service Bulletin IPSB/16-422.

Modifications to the ignition switch are unauthorized, and may violate Federal law by making
inoperative a device installed in compliance with Federal safety standards.

Damage or failure due to changes or modifications to the ignition switch system are not covered under
the terms of the warranty.

Damage or failure due to changes or modifications to the ignition switch system are not subject to
indemnification under the terms of the Infiniti Dealer Sales and Service Agreement.

Retailers may be obligated under their Sales and Service Agreement to indemnify Infiniti for any
damages, injuries, or deaths caused by modification of the ignition switch system.
AMENDMENT HISTORY
PUBLISHED DATE
REFERENCE
DESCRIPTION
March 30, 2017
ITB17-029
Original bulletin published.
April 6, 2017
ITB17-029a
SERVICE INFORMATION section revised.
January 16, 2019
ITB17-029b
SERVICE INFORMATION section revised.
2/2
ITB17-029b