A011734 2045909-

Service Bulletin Details

Public Details for: A011734 2045909-

This bulletin provides a software update for misfiring cylinders.


- 2017 - 2016 -

01 MIL on (DTC P030500) stored in ECM
01 17 34 2045909/5 September 1, 2017. Supersedes Technical Service Bulletin Group 01 number 17-33 dated
August 18, 2017 for reasons listed below.
Model(s)
Year
RS 7, RS 7
performance, 2016 - 2017
and S8 +
VIN Range
Vehicle-Specific Equipment
All
Not Applicable
Condition
REVISION HISTORY
Revision
Date
Purpose
5
-
Revised Service (Updated SVM table)
4
08/18/2017 Revised header data (Corrected display)
3
05/09/2017 Revised header data (Corrected display)
Customer statement:
 MIL on or flashing
Workshop findings:
Only DTC(s) regarding misfiring on cylinder 5 (P030500) are logged in the engine control module (ECM), J623
(address word 0001).
The following values are logged in the specific ambient conditions for DTC P030500:
 Engine speed between 5500 and 5900 rpm
 Standard load value over 70%
 Engine torque over 750 Nm
Technical Background
OBD diagnostics too sensitive at high engine load conditions.
Production Solution
New software in the engine control module (ECM), J623 (address word 0001) addressed the condition.
Page 1 of 3
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Service
SVM Update Instructions
1. Follow all instructions in TSB 2011732: 00 Software Version Management (SVM), operating instructions.
2. Update the engine control module (ECM), J623 (address word 0001) using the SVM action code as listed in
the table below if necessary:
Model
Engine Code
Old Software
Part Number
Old
Software
Version
New Software
Part Number
New Software
Version
SVM Code
Input
(or higher)
RS 7
CWUB
4G0906560D
0001
4G0906560G
0002
01A225
RS 7
CWUB
4G0906560G
0001
4G0906560G
0002
01A225
RS 7
performance
CWUC
4G0906560G
0001
4G0906560G
0002
S8 plus
DDTA
4H0907557H
0001
4H0907557H
0002
01A225
01A225
Warranty
Claim Type:
 110 up to 48 Months/50,000 Miles.
 1E1 up to 8 Years/80,000 Miles.
 G10 for CPO Covered Vehicles – Verify Owner.
 If vehicle is outside any warranty, this Technical Service Bulletin is informational
only.
Service Number:
2470
Damage Code:
0039
Labor Operations:
Update ECM software level
2470 2599
Max 50 TU
Diagnostic Time:
GFF – Checking and clearing fault codes
included in existing labor operations
No allowance
0 TU
Road test prior to service procedure
No allowance
0 TU
Road test after service procedure
No allowance
0 TU
Technical diagnosis at dealer’s discretion
Page 2 of 3
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
(Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details)
Claim Comment:
As per TSB #2045909/5
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures
Manual. Claims are subject to review or audit by Audi Warranty.
Required Parts and Tools
Approved battery charger.
Additional Information
The following Technical Service Bulletin(s) will be necessary to complete this procedure:
 TSB 2011732, 00 Software Version Management (SVM), operating instructions.
All parts and service references provided in this TSB (2045909) are subject to change and/or removal. Always
check with your Parts Department and service manuals for the latest information.
©2017 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest
information available at the time of printing and is subject to the copyright and other intellectual property rights of
Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these
materials be modified or reposted to other sites without the prior expressed written permission of the publisher.
Page 3 of 3
© 2017 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of
America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.