TSB 18-2360
Service Bulletin Details
Public Details for: TSB 18-2360
Models from 2019
2019 FORD MUSTANG |
Models from 2018
2018 FORD F-150 |
2018 FORD MUSTANG |
TECHNICAL SERVICE BULLETIN 5.0L - Illuminated Malfunction Indicator Lamp (MIL) With Diagnostic Trouble Codes (DTCs) P0390 And/Or P0394 18-2360 03 December 2018 Model: Ford 2018 F-150 2018-2019 Mustang Issue: Some 2018 F-150 and 2018-2019 Mustang vehicles equipped with a 5.0L engine may exhibit an illuminated MIL with DTCs P0390 and/or P0394 stored in the powertrain control module (PCM). Action: Follow the Service Procedure steps to correct the condition. Parts Part Number Description HL3Z-6M280-A Exhaust VCT Oil Control Solenoid JL3Z-6584-D Valve Cover Gasket (Left Side) Quantity 1 1 HL3Z-6C535-A Valve Cover Spark Plug Seal 1 BR3Z-6C535-A VCT Solenoid Valve Cover Seal 1 W712334-S440 Strut Tower Brace Nut 4 TA-30 Motorcraft® Silicone Gasket and Sealant 1 ZC-30-A Motorcraft® Silicone Gasket Remover 1 ZC-31-B Motorcraft® Metal Surface Prep Wipes 1 PM-4-A Motorcraft® Metal Brake Parts Cleaner (All Markets Except Canada) 1 PM-4-B Motorcraft® Metal Brake Parts Cleaner (Canada Only) 1 Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool. Labor Times Operation Time No. Description 2018 F-150 5.0L Engine: Retrieve DTCs And Replace The Bank 2 Exhaust VCT Oil Control Solenoid (Do Not Use With Any Other Labor Operations) 182360A 1.3 Hrs. 2018-2019 Mustang 5.0L Engine: Retrieve DTCs And Replace The Bank 2 Exhaust VCT Oil Control Solenoid (Do Not Use With Any Other Labor Operations) 182360B 2.0 Hrs. Repair/Claim Coding Causal Part: 6M280 Condition Code: 42 Tool List - All Models Drive Tool Name 1/4" Power Tool 1/4" Torque Wrench Drive Tool Name 1/4" Ratchet 1/4" 7 mm Deep Socket 1/4" 8 mm Deep Socket 1/4" 10 mm Deep Socket Trim Tool Plastic Scraper Blow Gun Essential Special Service Tool 205-142 Essential Special Service Tool 205-153 Essential Special Service Tool 303-1247 Tool List - Mustang Only Additional Tools Drive Tool Name 3/8" Power Tool 3/8" Torque Wrench 3/8" Ratchet 3/8" 10 mm Deep Socket 3/8" 13 mm Deep Socket 3/8" 15 mm Deep Socket Pocket Screwdriver 2 Jaw Puller Service Procedure 1. Using the appropriate Ford diagnostic scan tool or equivalent, retrieve DTCs. Are DTCs P0390 and/or P0394 the only DTCs stored in the PCM? (1). Yes - proceed to Step 2. (2). No - this article does not apply. Refer to the Powertrain Controls/Emissions Diagnosis (PC/ED) Manual for normal diagnostics. 2. Replace the bank 2 exhaust variable camshaft timing (VCT) oil control solenoid. Refer to Workshop Manual (WSM), Section 303-14. © 2018 Ford Motor Company All rights reserved. NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was current at the time of printing. Ford Motor Company reserves the right to supersede this information with updates. The most recent information is available through Ford Motor Company's on-line technical resources.