07-146-19
Service Bulletin Details
Public Details for: 07-146-19
This bulletin announces a design change made to the engine wiring harness to improve resistance to moisture. A detailed illustration describing the change is supplied below.
- 2019 - 2018 - 2017 - 2016 - 2015 -
Models from 2019
2019 SUBARU WRX |
Models from 2018
2018 SUBARU WRX |
Models from 2017
2017 SUBARU WRX |
Models from 2016
2016 SUBARU WRX |
Models from 2015
2015 SUBARU WRX |
ATTENTION: CLAIMS PERSONNEL q IMPORTANT - All Service Personnel Should Read and Initial in the boxes provided, right. SERVICE MANAGER © 2019 Subaru of America, Inc. All rights reserved. GENERAL MANAGER q PARTS MANAGER q q SERVICE BULLETIN APPLICABILITY: SUBJECT: 2015-2019MY WRX NUMBER: 07-146-19 Engine Wiring Harness- Design Change DATE: 01/24/19 INTRODUCTION: This bulletin announces a design change made to the engine wiring harness to improve resistance to moisture. A detailed illustration describing the change is supplied below. PRODUCTION CHANGE INFORMATION: This bulletin will be updated with starting VIN information for this change when it becomes available. PART INFORMATION: Description HARNESS-ENGINE Part Number Application 24020AF983 2015-17MY 24020AG431 2017-19MY NOTE: This part change was made during 2017MY production therefore, always order the most upto-date part number based on the specific VIN of the vehicle being repaired. Continued... CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS. Subaru Service Bulletins are intended for use by professional technicians ONLY. They are written to inform those technicians of conditions that may occur in some vehicles, or to provide information that could assist in the proper servicing of the vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do the job correctly and safely. If a condition is described, DO NOT assume that this Service Bulletin applies to your vehicle, or that your vehicle will have that condition. Subaru of America, Inc. is ISO 14001 Compliant ISO 14001 is the international standard for excellence in Environmental Management Systems. Please recycle or dispose of automotive products in a manner that is friendly to our environment and in accordance with all local, state and federal laws and regulations. Continued... Bulletin Number: 07-146-19; Date: 01/24/19 Page 1 of 2 SERVICE PROCEDURE / INFORMATION: REMINDER: Customer satisfaction and retention starts with performing quality repairs. The service procedures for replacing the engine wiring harness remain unchanged. Always refer to the applicable Service Manual and review the full requirements of the repair being performed. The Service Manual procedures contain information critical to performing an effective repair the first time, every time. This information includes but is not limited to: important SAFETY precautions, proper inspection criteria, necessary special tools, required processes and related one-time-use parts needed for a complete and lasting repair. WARRANTY / CLAIM INFORMATION: For vehicles within the Basic New Car Limited Warranty period or covered by an active Subaru Added Security Classic or Gold plan, this repair may be submitted using the following claim information: Labor Description Labor Operation # Labor Time ENGINE WIRING HARNESS DIAGNOSIS & REPAIR B880-159 ST ENGINE WIRING HARNESS R&R C880-151 2.1 Fail Code VKA-48 IMPORTANT REMINDERS: • SOA strongly discourages the printing and/or local storage of service information as previously released information and electronic publications may be updated at any time. • Always check for any open recalls or campaigns anytime a vehicle is in for servicing. • Always refer to STIS for the latest service information before performing any repairs. Bulletin Number: 07-146-19; Date: 01/24/19 Page 2 of 2