PIE0497
Service Bulletin Details
Public Details for: PIE0497
This engineering information pi is requesting information from the field on a mil on, dtc P1070 condition.
Models from 2019
2019 CADILLAC ATS |
2019 CADILLAC CTS |
Models from 2018
2018 CADILLAC ATS |
2018 CADILLAC CTS |
Models from 2017
2017 CADILLAC ATS |
2017 CADILLAC CTS |
Models from 2016
2016 CADILLAC ATS |
2016 CADILLAC CTS |
- 2016,2017,2018,2019 - CRC - 1/4/19 File in Section: Bulletin No.: Service Bulletin Date: PIE0497 December, 2018 ENGINEERING INFORMATION Subject: Engineering Information – Malfunction Indicator Lamp (MIL) On, DTC P1070 Set Attention: Proceed with this EI ONLY if the customer has commented about this concern AND the PIE number is listed in the Global Warranty Management / Investigate History link (GWM/IVH). If the customer has not commented about this condition or the EI does not show in GWM/IVH, disregard the PI and proceed with diagnostics found in published service information. THIS IS NOT A RECALL — refer to the latest version of Service Bulletin 04-00-89-053 for more details on the use of Engineering Information bulletins. Brand: Cadillac Model: ATS CTS Involved Region or Country Additional Options (RPOs) Condition Model Year: VIN: from to 2016 2019 from to Engine: Transmission: North America Equipped with ENG CONTROL-STOP/START SYS, CONVENTIONAL AT, CONVENTIONAL MT OR BRAKE RELEASE LATE RESTART (RPO KL9) Important: If the customer did not bring their vehicle in for this concern, DO NOT proceed with this EI. Some customers may comment on a malfunction indicator lamp (MIL) on. Technicians may find DTC P1070 set. GM Engineering is attempting to determine the root cause of the above condition. Engineering has a need to gather information on vehicles PRIOR to repair that may exhibit this condition. As a result, this information will be used to "root cause" the customer's concern and develop/validate a field fix. Cause Correction If you encounter a vehicle with the above concern, perform the following and contact the engineer below with your findings. • Make sure DTC P1070 is Current (this ignition cycle) and complete the Service Information Instructions for DTC P1070 steps 1 thru 11. • If DTC P1070 is still present, check K176 control module X1 connector for cut wiring. Contact Information Engineer Name Phone Number Dean Wisniewski (586) 487-4097 Please include the following information if leaving a message: – Technician name – Dealer name and phone number – Complete VIN and repair order (R.O) number On the repair order, document the date and time the call was placed (even if the engineer was not reached). If engineering is unable to return the call within one hour, proceed with diagnosis and repair based on information found in SI. - 2016,2017,2018,2019 - CRC - 1/4/19 Warranty Information If engineer was contacted or required information was provided, use: Labor Operation Description Labor Time 5480598* Engineering Information – Service Information Instructions for DTC P1070 Steps 1 Through 11, Also Checking K176 Control Module X1 Connector for Cut Wiring 1.0 hr *This is a unique labor operation for bulletin use only. Version 1 Modified Released December 04, 2018