JTB00683NAS1

3/5/2019
JTB00683NAS1 - Reverse Mirror Dip Function Inoperative | TOPIx
JTB00683NAS1
TECHNICAL BULLETIN
14 FEB 2019
© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with
the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar
service facility to determine whether this bulletin applies to a specific vehicle.
INFORMATION
SECTION:
501-00
SUBJECT/CONCERN:
Reverse Mirror Dip Function Inoperative
AFFECTED VEHICLE RANGE:
MODEL:
E-PACE (X540)
MODEL YEAR:
2019
VIN:
Z14466-Z51124
ASSEMBLY PLANT:
Graz (Austria)
MARKETS:
https://topix.jaguar.jlrext.com/topix/content/document/view?id=960625
1/4
3/5/2019
JTB00683NAS1 - Reverse Mirror Dip Function Inoperative | TOPIx
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
On vehicles with memory seat only, the reverse mirror dip function may be inoperative when REVERSE (R)
gear is selected.
CAUSE:
This may be caused by a CCF (Car Configuration File) error.
ACTION:
Should a customer express this concern, follow the Diagnostic Procedure(s) below.
PARTS:
No Parts Required
TOOLS:


Jaguar Land Roverapproved battery
power supply
Jaguar Land Roverapproved
diagnostic
equipment with
latest PATHFINDER
software
WARRANTY:
NOTES:
https://topix.jaguar.jlrext.com/topix/content/document/view?id=960625
2/4
3/5/2019
JTB00683NAS1 - Reverse Mirror Dip Function Inoperative | TOPIx
Repair procedures are under constant review, and therefore times are subject to change; those
quoted here must be taken as guidance only. Use TOPIx to obtain the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor only claims
must show the causal part number with a quantity of zero.
DESCRIPTION
SRO
TIME (HOURS)
CONDITION CODE
CAUSAL PART
Car Configuration File (CCF) - Update ECU
86.99.94
0.2
04
C2D51869
NOTE:
Normal Warranty procedures apply.
DIAGNOSTIC PROCEDURE:
CAUTIONS:
A Jaguar Land Rover-approved battery power supply must be connected to the vehicle startup
battery.
All ignition ON/OFF requests MUST be performed; failure to do these steps may cause damage
to vehicle control modules.
NOTE:
Use the Jaguar Land Rover claims submission system for Field Service Action program eligibility
requiring a CCF update. If eligible, perform and claim the update as per that program using the
latest PATHFINDER software.
1
2
Connect the Jaguar Land Rover-approved battery power supply to the vehicle startup battery.
NOTE:
The Jaguar Land Rover-approved diagnostic equipment must be loaded with PATHFINDER
version 217 (or later).
https://topix.jaguar.jlrext.com/topix/content/document/view?id=960625
3/4
3/5/2019
JTB00683NAS1 - Reverse Mirror Dip Function Inoperative | TOPIx
Connect the Jaguar Land Rover-approved diagnostic equipment to the vehicle and begin a new
session.
3
NOTE:
The Jaguar Land Rover-approved diagnostic equipment will read the correct Vehicle
Identification Number (VIN) for the current vehicle and automatically take the vehicle out of
Transit mode (if required).
Follow all on-screen instructions.
4
Select Service.
5
Select Select CCF.
6
Select Copy from AS BUILT.
1 Follow the on-screen instructions until the application finishes successfully.
7
Exit the current session.
1 If required, reset the vehicle to Transit mode.
2 Select the Exit icon.
8
Disconnect the diagnostic equipment and battery power supply from the vehicle.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=960625
4/4