2019 A7 20190114

2019
A7
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Verify tool kit is installed securely in luggage compartment
 Perform any open campaigns*
 Set spare tire pressure (if equipped)*
 Run Total PDI Test*
If vehicle doesn’t deactivate Vehicle Transport Mode or Flight
Mode, please follow the steps below
 Check battery clamps for proper torque*
 Deactivate Flight Mode for Telematics Control Unit (ConBox)
using Self-Diagnosis Adaptation*
Note: The VAS 6154 diagnostic head is required. See Technician Reference Document or TSB 2052299
 Place one PR Number Label in the Warranty and Maintenance Book inside front cover and one on the Rear Panel Sill
Frame under the luggage compartment floor, if not already
there*
Interior
 Deactivate air suspension loading mode (if equipped)*
 Verify operation of all seat belts and latches
 Set service reminder*
 Check operation of window, lock, and seat controls*
Exterior
 Check all key buttons and features*
 Check all doors for proper power closing (if equipped)*
 Inspect exterior for damage, dings, dents and surface
scratches
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Check heated steering wheel operation (if equipped)
 Verify operation heated/ventilated and massaging seats (if
equipped)*
Lighting and Windshield
 Verify operation of manual folding 2nd row
 Test exterior lighting functions
 Verify proper operation of climate control*
 Test front washers (and headlight washers if equipped)*
 Inspect operation of all power outlets*
 Install wiper blades
 Check sunroof and sunshade operation*
Trunk Inspection
 Verify operation of front Passenger Occupant Detection
System
 Verify trunk is operational
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
Effective 1-14-2019-US
Version 1.2
 Verify operation of rear side manual sunshades (if equipped)
 Verify operation of power rear sunshade (if equipped)
PRE-DELIVERY INSPECTION (PDI) | 1
2019
A7
Audi Pre-Delivery Inspection
Settings
Driving Performance (continued)
 Verify operation of MMI® touch screens, upper and lower
 Verify engine performance and acceleration*
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Verify transmission operation, including shift paddles
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Music volume while parking” to medium*
 Set dealership location in navigation*
 Turn off Manual Speed Warning (if equipped)*
Media / Radio / SAT
 Test drive vehicle applying brakes several times*
 Check adaptive air suspension in all positions (if equipped)
 Verify rear spoiler functionality (if equipped)
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
 Verify operation of all USB ports
Driver Assistance
 Verify operation of aux. input
 Verify all cruise control functions
 Verify operation of CD/DVD player (if equipped)
 Verify cruise control/ACC with Stop & Go functionality (if
equipped), which includes the following:
 Insert SD card and test function of slot
 Program the presets to local stations
 Adaptive Cruise Assist
 Verify HD Radio is turned “off”*
 Turn Assist
 Verify Audi phone box sticker and registration information is
present (if equipped). See TSB 2051720
 Intersection Assistant
Audi connect® (USA ONLY)
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI due
to dealer demo mode (if equipped)*
 Enable satellite map for navigation (if equipped)*
 Traffic Jam Assist
 Predictive Efficiency Assist
 Active lane assist with emergency assistant
 Traffic sign recognition
 Verify Audi side assist functionality Pre sense® rear (if
equipped)
 Verify operation of night vision camera (if equipped)
On-Hoist Inspection
 Verify operation of parking system*
 Remove transport suspension blocks (follow ELSA instruction)
 Verify all vehicle Head-up display functionality (if equipped)*
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Activate NAV and follow directions back to dealership
 Check underside of vehicle for fluid leaks and loose components
Post-Road Test Inspection
 Verify operation of High-beam assistant (if equipped)
 Install wheel locks (if equipped)
 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
 Install wheel bolt covers and center caps as supplied*
 Check service interval and verify correct interval is displayed
 Inspect wheel bolts for proper torque*
 Check engine oil level*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Check all fluid levels and top off if necessary
Driving Performance
 Check horn operation
 Verify hold and release of electronic parking brake
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**
 Verify engine Start-Stop System functionality*
Effective 1-14-2019-US
Version 1.2
PRE-DELIVERY INSPECTION (PDI) | 2
2019
A7
Audi Pre-Delivery Inspection
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 1-14-2019-US
Version 1.2
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3