IK2600007

IK2600007 - How to Get from History and Program a BCM or ESC
Countries:
Page 1 of 4
AUSTRALIA, BAHAMAS, BOLIVIA, BRAZIL, BELIZE, CANADA,
CHILE, TAIWAN, COLOMBIA, COSTA RICA, DOMINICAN
REPUBLIC, ECUADOR, EL SALVADOR, TRINIDAD AND
Document
TOBAGO, UNITED STATES, URUGUAY, VENEZUELA,
IK2600007
MEXICO, ARUBA, NICARAGUA, PERU, PUERTO RICO,
ID:
Curaçao, GUAM, GUATEMALA, GUYANA, HAITI, HONDURAS,
JAMAICA, KOREA, SOUTH KOREA, PANAMA, SOUTH
AFRICA
Availability: ISIS, IsSIR
Revision: 8
Major
System:
PROGRAMMING SUPPORT
Created:
2/22/2007
Current
Language:
English
Last
Modified:
11/5/2018
Author:
Charles
Schroeder
Other
Français, Español,
Languages:
Viewed:
9317
Less Info
Coding Information
Hide Details
Copy Link
Copy Relative Link
Bookmark
Add to Favorites
Print
Provide Feedback
View My Bookmarks
Helpful
Not Helpful
1627
782
Title : How to Get from History and Program a BCM or ESC
Applies To : All Vehicles with a BCM or ESC
Change Log
Please refer to the change log text box below for recent changes to this article:
11/05/2018 ‐ Added BCM programming harness instructions under Special Tools / Software and at Step 6 of Troubleshooting
10/16/2018 ‐ Added additional steps under troubleshooting to correct a BCM programmed to the incorrect baud rate.
10/12/2018 ‐ Added special tool inforamtion for bench programming based on dealer feedback.
08/28/2017 ‐ Author updated for feedback purposes.


Description
How to get from history and program a Body Control Module (BCM) or Electronic System Controller (ESC) with Diamond Logic Builder (DLB). This
instruction applies to modules that are new and blank, or if an update has been performed remotely and sent to the server for retrieval. Please
read instructions through one complete time before attempting to program.
Special Tools / Software
Tool Description
Tool
Number
Comments
Instructions
EZ‐Tech® or Electronic Service Tool (EST)
with
Diamond Logic Builder (DLB) Software
Harness, Body Control Programming
12‐999‐12
Used to bench program / re‐flash 250K and 500K Body Control.
Must be used in combination with ECM Programming Station 12‐801‐01‐
01 and
EZ‐Tech computer with Diamond Logic Builder (DLB) software loaded.
Programming Station with PCB
12‐801‐01‐
01
Control Module Programming Station. Part of 12‐801‐01.
This kit includes:
x1 pc of p/n: 12‐801‐01‐08 (12 Amp Power Supply),
x1 pc of p/n: 12‐801‐01‐09 (Cigarette Power Adapter)
x1 pc of p/n: 12‐801‐01‐10 (Battery Terminal Power Adapter).
4328530R1
Service Parts Information
Body Control Module (2007 and newer vehicles)
Electronic System Controller (Pre‐2007 vehicles)
4044470C5
Always refer to the Parts Catalog for the VIN you are working on for
accuracy
3833155C2
5011081R1
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlI...
12/4/2018
IK2600007 - How to Get from History and Program a BCM or ESC
Page 2 of 4
Always refer to the Parts Catalog for the VIN you are working on for
accuracy
Service Procedure
1.
2.
3.
4.
5.
Install the new BCM or ESC
Connect the smart charger to the truck batteries and verify voltage is between 12.5vDC and 14.0vDC
Ensure the key is in the OFF position and the dome light or park lights are turned ON
Open DLB and connect to the BCM or ESC using an appropriate RP1210 COM adapter, such as a Nexiq cable
Get the VIN from History. Refer to Figure 1
Figure 1
1. Get VIN from History
2. Enter 8 digit Chassis number and Click on Request VINs
3. If prompted that a version already exists, click Yes to override the existing version
6. Make sure the correct VIN is selected (It will be highlighted blue as shown)
7. Click on the arrow at the 'Program' button and select 'Program Module' from the drop down. Refer to Figure 2
◦ The Key should be in the OFF position while programming the BCM
◦ The dome light or park lights should be ON to ensure the BCM remains awake during the programming process
Figure 2
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlI...
12/4/2018
IK2600007 - How to Get from History and Program a BCM or ESC
Page 3 of 4
1. Click the arrow and select 'Program Module' from the drop down
8. Verify 'Selected Vehicle' and 'Detected' columns match after programming
Troubleshooting
1. If you have problems or questions programming an ESC / Body Controller then create an iKNow case file
2. State any error messages or on screen notifications
3. Figure 3 below shows an error when a programmed module is installed into a vehicle with a different baud rate
Figure 3
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlI...
12/4/2018
IK2600007 - How to Get from History and Program a BCM or ESC
Page 4 of 4
4. You can use the BCM programming harness 12‐999‐12 along with the programming station 12‐801‐01‐01 to correct the issue in figure 3.
◦ Connect to the BCM, you will most likely find it is already programmed with a VIN.
◦ Once connected, program the BCM to the desired VIN.
◦ Reinstall the BCM into the desired vehicle.
◦ Connect with DLB and verify operation in vehicle.
5. Alternatively to step 4, you can also install the BCM into a different baud rate vehicle, and reprogram to correct the issue in figure 3.
◦ If you cannot connect to the BCM in a 250k baud rate vehicle, install the BCM into a 500k baud rate vehicle
◦ If you cannot connect to the BCM in a 500k baud rate vehicle, install the BCM into a 250k baud rate vehicle
◦ Attempt to connect to the BCM with the key off, you will most likely find it is already programmed with a VIN.
◦ Once connected, program the BCM to the desired VIN.
◦ Remove the BCM, and install it back into the desired vehicle.
◦ Connect with DLB and verify operation in vehicle.
6. Tool Instruction 4328530R1 for BCM Programming Harness
Hide Details
Feedback Information
Viewed:
9316
Helpful:
1627
Not Helpful: 782
No Feedback Found
Copyright © 2018 Navistar, Inc.
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlI...
12/4/2018