PDITechRep2019A5
Service Bulletin Details
Public Details for: PDITechRep2019A5
Vehicle preparation section: removed: "run total pdi test, deactivate flight mode for telematics control unit, deactivate air suspension loading mode, set adaption channel to enable cd ripping using guided functions, & set service reminder"
- 2019 -
Models from 2019
2019 AUDI A5 |
2019 AUDI RS5 |
2019 AUDI S5 |
2019 A5/S5/RS 5 Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by a certified Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Interior (continued) Check Elsa for open campaigns and updates Verify operation of all interior lights Perform any open campaigns* Verify SOS button is green and Roadside assistance button LED will remain off (if equipped). Reference TSB 2052299 if issues occur Perform diagnostic work* Exterior Verify operation heated/ventilated seats (if equipped) Check all key buttons and features* Verify proper operation of climate control* Inspect exterior for damage, dings, dents and surface scratches Inspect operation of all power outlets* Lighting and Windshield Test exterior lighting functions Test front washers (and headlight washers if equipped)* Verify the glove compartment opens and closes properly Check panoramic sunroof and sunshade operation* Verify operation of front Passenger Occupant Detection System Settings Trunk Inspection Verify operation of MMI® touch screen (if equipped) Verify trunk is operational Set Time source setting to “GPS” and set Auto daylight savings time to “on.”* Verify operation of emergency release handle Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Set Time to “Automatic setting” and “Automatic time zone” Verify and set language and measurement units* Verify tool kit is installed securely in luggage compartment Verify Speech Dialog System is operating* Set spare tire pressure* Set “Entertain. Fad.” in Parking aid to an audible level* Check battery clamps for proper torque* Set “Music volume while parking” to medium* Interior Verify operation of all seat belts and latches Set dealership location in navigation (if equipped)* Turn off Manual Speed Warning (if equipped)* Check operation of window, lock, and seat controls* Media / Radio / SAT Inspect mirrors for proper operation* Verify operation of aux. input (if equipped) Check rear view mirror operation* Verify operation of CD/DVD player (if equipped) Effective 3-14-2019-US Version 1.3 PRE-DELIVERY INSPECTION (PDI) | 1 2019 A5/S5/RS 5 Audi Pre-Delivery Inspection Media / Radio / SAT (continued) Driver Assistance Insert SD card and test function of all slots Verify cruise control/ACC with Stop & Go functionality (if equipped) Verify HD Radio is turned “off”* Verify Audi side assist functionality (if equipped) Audi connect® (USA ONLY) (if equipped) Verify Audi active lane assist functionality (if equipped) Turn on the Wi-Fi® hotspot (if equipped)* Verify operation of parking system (if equipped)* Check Wi-Fi® hotspot visibility. No data available at PDI (if equipped)* Verify all vehicle Head-up display functionality (if equipped)* Enable Google Earth view for navigation (if equipped)* Activate NAV and follow directions back to dealership (if equipped) On-Hoist Inspection Convertible Functionality (if equipped) Remove transport suspension blocks (follow ELSA instruction) Test operation of power folding top* Check steering, boots, brake system, hoses, tires and wheels for damage Verify convertible top manual closing tools are present Check underside of vehicle for fluid leaks and loose components Post-Road Test Inspection Install wheel locks (if equipped) Install wheel bolt covers and center caps as supplied* Interrogate fault memory and upload Diagnostic Log to GFF Paperless Server Inspect wheel bolts for proper torque* Check Service Interval and verify correct interval is displayed Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Check engine oil level* Driving Performance Check horn operation Verify hold and release of electronic parking brake Verify engine Start-Stop System functionality* Check all fluid levels and top off if necessary Ensure the yellow tire pressure tag is installed on the steering wheel Apply 30 Day Inventory Maintenance Sticker** Install showroom charger to ensure battery remains charged at all times** Verify engine performance and acceleration* Verify transmission operation, including shift paddles (if equipped) Test drive vehicle applying brakes several times* Check steering/tire alignment Check for squeaks, rattles and wind noise Calibrate rear view mirror* Verify quality of radio reception in AM/FM/SiriusXM® bands Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 3-14-2019-US Version 1.3 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 2