2019 TT-TTS-TTRS

2019
TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Check battery clamps for proper torque*
 Perform any open campaigns*
 Deactivate vehicle transport mode*
This step must be performed with the engine off, and ignition on
 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*
 Set service reminder*
Interior
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
Exterior
 Verify operation heated seats
 Check all key buttons and features*
 Verify proper operation of climate control*
 Inspect exterior for damage, dings, dents and surface
scratches
 Inspect operation of all power outlets*
 Verify operation of front Passenger Occupant Detection
System
Lighting and Windshield
 Test exterior lighting functions
 Test windshield washers
Settings
 Verify operation of MMI®
Trunk Inspection
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Verify trunk is operational
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify operation of emergency release handle
 Verify and set language and measurement units*
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify Speech Dialog System is operating*
 Verify tool kit is installed securely in luggage compartment
 Set dealership location in navigation (if equipped)*
 Verify inflatable repair kit and compressor are present (TT
RS only)
 Turn off Manual Speed Warning (if equipped)*
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Set spare tire pressure (NA for TT RS)*
Effective 1-14-2019-US
Version 1.2
PRE-DELIVERY INSPECTION (PDI) | 1
2019
TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Media / Radio / SAT
Driving Performance (continued)
 Verify operation of aux. input (if equipped)
 Check for squeaks, rattles and wind noise
 Verify operation of CD/DVD player
 Verify quality of radio reception in AM/FM/SiriusXM® bands
 Insert SD card and test function of slot
Driver Assistance
 Program the presets to local stations
 Verify cruise control
 Verify HD Radio is turned “off”*
 Verify Audi side assist functionality with rear cross traffic
alert (if equipped)
Audi connect® (USA ONLY) (if equipped)
 Verify operation of Audi parking system plus*
 Turn on the Wi-Fi® hotspot (if equipped)*
 Activate NAV and follow directions back to dealership (if
equipped)
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Enable Google Earth view for navigation (if equipped)**
Roadster Functionality (if equipped)
 Test operation of power folding top*
On-Hoist Inspection
 Verify convertible top manual closing tools are present
 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
Post-Road Test Inspection
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Perform a battery test*
 Inspect wheel bolts for proper torque*
 Check service interval and verify correct interval is displayed
 Install wheel locks (if equipped)
 Check engine oil level*
 Install wheel bolt covers and center caps as supplied*
 Check all fluid levels and top off if necessary
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply 30 Day Inventory Maintenance Sticker**
Driving Performance
 Check horn operation
 Install showroom charger to ensure battery remains
charged at all times**
 Verify hold and release of electronic parking brake
 Must fuel with 91 Octane or higher (TTS, TT RS)
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
 Test drive vehicle applying brakes several times*
 Verify rear spoiler functionality (if equipped)
 Check steering/tire alignment
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 1-14-2019-US
Version 1.2
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2