2019 TT-TTS-TTRS
Service Bulletin Details
Public Details for: 2019 TT-TTS-TTRS
Removed all audi connect references
- 2019 -
Models from 2019
2019 AUDI TT |
2019 AUDI TT ROADSTER |
2019 AUDI TTS |
2019 TT Coupe & Roadster/TTS/TT RS Audi Pre-Delivery Inspection Stock No. Dealer Number R.O. No. VIN Road test mileage out Road test mileage in Reminders All items must be completed prior to customer delivery by a certified Audi technician Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information For items marked with **, follow instructions for stock inventory vehicle Vehicle Preparation Trunk Inspection (continued) Check Elsa for open campaigns and updates Check battery clamps for proper torque* Perform any open campaigns* Deactivate vehicle transport mode* This step must be performed with the engine off, and ignition on Set adaption channel to enable CD Ripping using Guided Functions (if equipped with NAV)* Set service reminder* Interior Verify operation of all seat belts and latches Check operation of window, lock, and seat controls* Inspect mirrors for proper operation* Check rear view mirror operation* Verify operation of all interior lights Exterior Verify operation heated seats Check all key buttons and features* Verify proper operation of climate control* Inspect exterior for damage, dings, dents and surface scratches Inspect operation of all power outlets* Verify operation of front Passenger Occupant Detection System Lighting and Windshield Test exterior lighting functions Test windshield washers Settings Verify operation of MMI® Trunk Inspection Set Time source setting to “GPS” and set Auto daylight savings time to “on”* Verify trunk is operational Set Time to “Automatic setting” and “Automatic time zone” Verify operation of emergency release handle Verify and set language and measurement units* Install wheel bolt cover removal tool from PDI kit into trunk tool kit* Verify Speech Dialog System is operating* Verify tool kit is installed securely in luggage compartment Set dealership location in navigation (if equipped)* Verify inflatable repair kit and compressor are present (TT RS only) Turn off Manual Speed Warning (if equipped)* Set “Entertain. Fad.” in Parking aid to an audible level* Set spare tire pressure (NA for TT RS)* Effective 2-8-2019-US Version 1.3 PRE-DELIVERY INSPECTION (PDI) | 1 2019 TT Coupe & Roadster/TTS/TT RS Audi Pre-Delivery Inspection Media / Radio / SAT Driver Assistance Verify operation of aux. input (if equipped) Verify cruise control Verify operation of CD/DVD player Verify Audi side assist functionality with rear cross traffic alert (if equipped) Insert SD card and test function of slot Verify operation of Audi parking system plus* Program the presets to local stations Activate NAV and follow directions back to dealership (if equipped) Verify HD Radio is turned “off”* On-Hoist Inspection Roadster Functionality (if equipped) Remove transport suspension blocks (follow ELSA instruction) Test operation of power folding top* Check steering, boots, brake system, hoses, tires and wheels for damage Check underside of vehicle for fluid leaks and loose components Inspect wheel bolts for proper torque* Install wheel locks (if equipped) Install wheel bolt covers and center caps as supplied* Set and store tire pressures for either sold vehicle OR stock inventory vehicle* Verify convertible top manual closing tools are present Post-Road Test Inspection Interrogate fault memory and upload Diagnostic Log to GFF Paperless Server Perform a battery test* Check service interval and verify correct interval is displayed Check engine oil level* Check all fluid levels and top off if necessary Driving Performance Ensure the yellow tire pressure tag is installed on the steering wheel Check horn operation Apply 30 Day Inventory Maintenance Sticker** Verify hold and release of electronic parking brake Install showroom charger to ensure battery remains charged at all times** Verify engine performance and acceleration* Verify transmission operation, including shift paddles (if equipped) Must fuel with 91 Octane or higher (TTS, TT RS) Test drive vehicle applying brakes several times* Verify rear spoiler functionality (if equipped) Check steering/tire alignment Check for squeaks, rattles and wind noise Verify quality of radio reception in AM/FM/SiriusXM® bands Technician I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and Quality Standards, and has met the standards for Perfect Delivery. Technician Signature Effective 2-8-2019-US Version 1.3 Last 8 of VIN Completion Date PRE-DELIVERY INSPECTION (PDI) | 2