LI91 18-P-066760
Service Bulletin Details
Public Details for: LI91 18-P-066760
Gap forms in seat cushion cover at side panel
- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 - 2006 - 2005 - 2004 - 2003 -
Models from 2019
2019 MERCEDES-BENZ AMG E63S |
Models from 2017
2017 MERCEDES-BENZ AMG E43 |
Models from 2016
2016 MERCEDES BENZ E63 |
Models from 2015
2015 MERCEDES BENZ E63 |
Models from 2014
2014 MERCEDES BENZ E63 |
Models from 2013
2013 MERCEDES BENZ E63 |
Models from 2012
2012 MERCEDES BENZ E63 |
Models from 2011
2011 MERCEDES BENZ E63 |
Models from 2010
2010 MERCEDES BENZ E63 |
Models from 2009
2009 MERCEDES-BENZ AMG E63 |
2009 MERCEDES BENZ E63 |
Models from 2008
2008 MERCEDES-BENZ AMG E63 |
2008 MERCEDES BENZ E63 |
Models from 2007
2007 MERCEDES-BENZ AMG E63 |
2007 MERCEDES BENZ E63 |
Models from 2006
2006 MERCEDES BENZ E63 |
Models from 2005
2005 MERCEDES BENZ E63 |
Models from 2004
2004 MERCEDES-BENZ AMG E63 |
2004 MERCEDES BENZ E63 |
Models from 2003
2003 MERCEDES-BENZ AMG E63 |
2003 MERCEDES BENZ E63 |
Gap forms in seat cushion cover at side panel Topic number LI91.18-P-066760 Version 1 Design group 91.18 Seat covers Date 07-18-2017 Validity 213.064, 213.088, 213.089, 213.264, 213.288, 213.289 Reason for change Reason for block Complaint: Gap formation between seat cushion cover and side panel of seat. Cause: Dimensioning of seat cushion cover. Remedy: Insert the spacer under the fabric as described in the instructions if the gap is not OK following visual inspection. The seat cover is not replaced. Operation step 1: Visual inspection -> Clearly visible hole and/or fraying -> cover not OK (see instructions, page 1) -> Narrow gap without fraying -> cover OK (see instructions, page 1) Operation step 2: Move seat and prepare spacer -> Move seat forward and upward (see instructions, page 2) -> Remove film from bonding surface of spacer (A 124 695 00 33) (see instructions, page 2). Operation step 3: Lift side bolster and insert spacer -> Push side bolster of seat toward vehicle center and lift (see instructions, page 3) -> Push spacer, bonding surface first, into opening (see instructions, page 3) Operation step 4: Fit cover -> Slide cover over spacer and carefully pull it down (see instructions, page 4) Operation step 5: Stroke side bolster toward spacer -> Stroke side bolster toward spacer (see instructions, page 5) 07-18-2017 2:51 PM © Copyright Daimler AG WASHING Page 1/2 Attachments File Description Arbeitsanweisung_Spaltbildung_Sitzkissen_BR213_AMG. Work instructions pdf Symptoms Body / Seat / Seat cover / Detaches Parts Part number ES1 ES2 Designation A 124 695 00 33 Quantity Note Spacer 1 EPC 1 spacer per seat. X Operation numbers/damage codes Op. no. Operation text 07-18-2017 2:51 PM © Copyright Daimler AG Time WASHING Damage code Note 91A04 ** Do not replace seat cushion cover. Page 2/2 nicht in Ordnung in Ordnung 1 A 124 695 00 33 2 3 4 5 6