TSB-19-54-006

Page 1 of 12
SUBJECT:
UPDATED BSW-ECU INSPECTION
PROCEDURE - SERVICE MANUAL REVISION
No:
TSB-19-54-006
DATE:
March 2019
MODEL:
2017 Outlander
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ ] WARRANTY PROCESSOR
[ ] SALES MANAGER
PURPOSE
This TSB updates the Chassis Electrical section of the affected Service Manual to update the Blind
Spot Warning (BSW) ECU Inspection procedure.
AFFECTED VEHICLES
D
2017 Outlander
AFFECTED SERVICE MANUALS
D
2017 Outlander Service Manual, Group 54-Chassis Electrical
Copyright 2019, Mitsubishi Motors North America, Inc.
Continued
The information contained in this bulletin is subject to change. For the latest version of this document, go to the
Mitsubishi Dealer Link, MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
(4518)
Page 2 of 12
TSB-19-54-006
Please replace the existing information for BSW-ECU Inspection (3 pages below, labeled “”)
with the updated information that follows (8 pages, labeled “”) in the 2017 Outlander Service
Manual, Group 54-Chassis Electrical -> 54A -> Blind Spot Warning (BSW)/Rear Cross Traffic Alert
(RCTA) -> BSW-ECU Inspection.
Page 3 of 12
TSB-19-54-006
Page 4 of 12
TSB-19-54-006
Page 5 of 12
TSB-19-54-006
NOTE: U.S. Dealers should use Essential Tool MB99RT01V, “BSW/RCTA Tester” for checking the BSW radar
calibration. If this tool is not available, follow the instructions below for “Fabricating a reflector for
inspection of the BSW” to create a tool for the BSW-ECU inspection.
Page 6 of 12
TSB-19-54-006
Page 7 of 12
TSB-19-54-006
Page 8 of 12
TSB-19-54-006
Page 9 of 12
TSB-19-54-006
Page 10 of 12
TSB-19-54-006
Page 11 of 12
TSB-19-54-006
Page 12 of 12
TSB-19-54-006