A911935 2053778-
Service Bulletin Details
Public Details for: A911935 2053778-
This information bulletin contains instructions for activating the topview camera after transport mode.
- 2019 -
Models from 2019
2019 AUDI A6 |
2019 AUDI A7 |
2019 AUDI A8 |
2019 AUDI Q8 |
Technical Service Bulletin 91 TopView cameras do not work after deactivating transport mode 91 19 35 2053778/1 February 7, 2019. Model(s) Year VIN Range Vehicle-Specific Equipment A6, A7, A8, and Q8 2019 All With TopView camera Condition Workshop findings: The TopView camera system does not work after deactivating the transport mode. The picture of the TopView cameras is black in the MMI screen. All views are affected. Please compare Figure 1 to the surrounding area view. Figure 1. Example image for blackened Topview camera. The following DTCs may be stored in the control module for driver assist systems, J1121 (address word 00A5): DTC B13B901 (video cable for information electronics 1 - electric fault). DTC U105400 (Infotainment control unit 1, no communication). Technical Background The MMI is deactivated in transport mode. As a result, there are no video signals when initializing the control module for driver assist systems. Production Solution Not applicable. Page 1 of 2 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service 1. After deactivating the transport mode, perform a CAN bus sleep on the vehicle by unplugging the diagnostic dongle, close all the doors, and wait approximately five minutes. 2. Afterwards the TopView camera system works properly again. Warranty This TSB is informational only and not applicable to any Audi Warranty. Additional Information All parts and service references provided in this TSB (2053778) are subject to change and/or removal. Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites without the prior expressed written permission of the publisher. Page 2 of 2 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.