10-002-15

NUMBER:
10-002-15
GROUP:
Restraints
DATE:
December 05, 2015
This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
SUBJECT:
Seat Belt Interaction With Police Equipment
OVERVIEW:
This bulletin involves installing a comfort clip on the seat belt.
MODELS:
2006 - 2010 (LX)
2011 - 2015 (LD)
Dodge Charger
NOTE: This bulletin applies to vehicles within the following markets/countries:
NAFTA
NOTE: This bulletin applies to vehicles equipped with Police Group (Sales Code
AHB).
SYMPTOM/CONDITION:
The officer may describe a rare interaction between brought-in police equipment and the
vehicle’s seat belt latch plate.
NOTE: Installation of the comfort clip will allow officers to re-position their seat belt
latch plate to minimize the risk of unintended equipment interactions.
DIAGNOSIS:
If the customer describes the symptom/condition listed above, perform the Repair
Procedure.
PARTS REQUIRED:
Qty.
Part No.
Description
1
68303602AA
Clip, Comfort, Seat Belt Kit
(Kit will service two seat belts)
10-002-15
-2-
REPAIR PROCEDURE:
1. Are the front seat belts already equipped with a comfort clips?
a. YES>>> This Bulletin does not apply. Normal diagnosis should be performed.
b. NO>>> Continue with the Repair Procedure Step #2.
NOTE: Repeat comfort clip installation procedure for both front seat belts.
2. Obtain two comfort clip halves (1) as shown in (Fig. 1).
Fig. 1 Seat Belt Comfort Clip Two Halves
1 - Seat Belt Comfort Clip Kit
-3-
10-002-15
3. The comfort clip is to be installed in the area (3) between the stop button (1) and the
latch plate (2) as shown in (Fig. 2).
Fig. 2 Seat Belt Comfort Clip Location
1 - Seat Belt Web Stop Button
2 - Seat Belt Latch Plate
3 - Comfort Clip Location
10-002-15
-4-
4. Position one clip half (1) with the teeth facing forward behind the seat belt webbing (2)
as shown in (Fig. 3).
Fig. 3 Position Comfort Clip Behind Seat Belt
1 - Comfort Clip Half
2 - Seat Belt Webbing
-5-
10-002-15
5. Position the second clip half with the teeth facing rearward to the first clip while
aligning the snap features of both clips (1) as shown in (Fig. 4).
6. Fasten the clip halves together (2) by pressing until both sides “click” (Fig. 4).
Fig. 4 Press Comfort Clip Halves Together To Fasten
1 - Align Comfort Clip Halves
2 - Fasten Comfort Clip Halves
10-002-15
-6-
7. Place the comfort clip in the desired position on the seat belt and allow the latch plate
to rest on top of the clip (Fig. 5).
Fig. 5 Place Comfort Clip In Desired Position
1 - Position Comfort Clip
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation
No:
23-13-05-90
Description
Install Comfort Clips, Both Front Seat
Belts
(0 - Introduction)
FAILURE CODE:
ZZ
Service Action
Skill Category
6 - Electrical
and Body
Systems
Amount
0.2 Hrs.