ITB19-009

Service Bulletin Details

Public Details for: ITB19-009

Intelligent key does not work after battery replacement service information if the intelligent key of an applied vehicle does not work after replacing the battery, inspect the positive (+) terminals. If the battery side of the intellig


- 2019 -

Classification:
Reference:
Date:
EL19-010
ITB19-009
April 4, 2019
INTELLIGENT KEY DOES NOT WORK AFTER BATTERY REPLACEMENT
APPLIED VEHICLES: 2019 QX50 (J55)
2019 QX60 (L50)
2019 QX60 Hybrid (L50H)
2019 Q50 (V37)
2019 Q60 (V37)
SERVICE INFORMATION
If the Intelligent Key of an APPLIED VEHICLE does not work after replacing the battery, inspect the positive (+)
terminals.
If the battery side of the Intelligent Key is held by pinching down on the terminals while removing the battery, it
is possible to bend the terminals down far enough that they will not touch the contacts on the other half of the
Intelligent Key.
If the terminals are found to be bent down, pry them back up so that they will come in contact with the other half
of the Intelligent Key’s contacts.

Refer to the photos on the following pages.
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/5
“+”
“+”terminals
terminals
contacting
contactingother
the
half
other
of Intelligent
half of the
Intelligent
Key Key
OK
Battery fits
here
“+” terminals
“+” terminals
contacting
contacting battery
the battery
Figure 1
2/5
ITB19-009
Do not hold here when
removing/installing
the battery
Battery
Intelligent Key –
battery side
Figure 2
3/5
ITB19-009
NG
Bent “+”
terminal
Figure 3
Hold down the
“+” terminal &
battery while
adjusting the
terminals
Using a pocket screwdriver
or suitable tool, carefully pry up
on the terminals as needed
Figure 4
4/5
ITB19-009
AMENDMENT HISTORY
PUBLISHED DATE
April 4, 2019
REFERENCE
ITB19-009
DESCRIPTION
Original bulletin published
5/5
ITB19-009


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.