PDITechRep2019TT

Service Bulletin Details

Public Details for: PDITechRep2019TT

Vehicle preparation section: removed: "deactivate vehicle transport mode, set adaption channel to enable cd ripping using guided functions, & set service reminder" added: "perform diagnostic work"


- 2019 -

2019
TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Interior (continued)
 Check Elsa for open campaigns and updates
 Check operation of window, lock, and seat controls*
 Perform any open campaigns*
 Inspect mirrors for proper operation*
 Perform diagnostics work*
 Check rear view mirror operation*
 Verify operation of all interior lights
Exterior
 Check all key buttons and features*
 Inspect exterior for damage, dings, dents and surface
scratches
Lighting and Windshield
 Test exterior lighting functions
 Test windshield washers
Trunk Inspection
 Verify trunk is operational
 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable repair kit and compressor are present (TT
RS only)
 Verify operation heated seats
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Verify operation of front Passenger Occupant Detection
System
Settings
 Verify operation of MMI®
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Set dealership location in navigation (if equipped)*
 Turn off Manual Speed Warning (if equipped)*
 Set spare tire pressure (NA for TT RS)*
 Check battery clamps for proper torque*
Media / Radio / SAT
 Verify operation of aux. input (if equipped)
Interior
 Verify operation of CD/DVD player
 Verify operation of all seat belts and latches
 Insert SD card and test function of slot
Effective 3-14-2019-US
Version 1.4
PRE-DELIVERY INSPECTION (PDI) | 1
2019
TT Coupe & Roadster/TTS/TT RS
Audi Pre-Delivery Inspection
Media / Radio / SAT (continued)
Driver Assistance (continued)
 Program the presets to local stations
 Verify operation of Audi parking system plus*
 Verify HD Radio is turned “off”*
 Activate NAV and follow directions back to dealership (if
equipped)
On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)
Roadster Functionality (if equipped)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Verify convertible top manual closing tools are present
 Check underside of vehicle for fluid leaks and loose components
Post-Road Test Inspection
 Test operation of power folding top*
 Inspect wheel bolts for proper torque*
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Install wheel locks (if equipped)
 Check service interval and verify correct interval is displayed
 Install wheel bolt covers and center caps as supplied*
 Check engine oil level*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Check all fluid levels and top off if necessary
Driving Performance
 Check horn operation
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Apply 30 Day Inventory Maintenance Sticker**
 Verify hold and release of electronic parking brake
 Install showroom charger to ensure battery remains
charged at all times**
 Verify engine performance and acceleration*
 Must fuel with 91 Octane or higher (TTS, TT RS)
 Verify transmission operation, including shift paddles (if
equipped)
 Test drive vehicle applying brakes several times*
 Verify rear spoiler functionality (if equipped)
 Check steering/tire alignment
 Check for squeaks, rattles and wind noise
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Driver Assistance
 Verify cruise control
 Verify Audi side assist functionality with rear cross traffic
alert (if equipped)
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 3-14-2019-US
Version 1.4
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.