PIC6013E

Service Bulletin Details

Public Details for: PIC6013E

This preliminary information communication provides information to the technician about vehicles that have a "adaptive cruise temporarily unavailable" message on the driver information center when attempting to activate the cruise. Technici


- 2019 - 2018 - 2017 - 2016 - 2015 - 2014 - 2013 -

Bulletin No.: PIC6013E
Published date: 04/10/2019
Preliminary Information
PIC6013E Diagnostic Tip - Adaptive Cruise Temporarily Unavailable,
Park Assist Symbols Unavailable, Lane Departure Warning
Unavailable, Rear Auto Braking Unavailable
Models
Brand:
Model:
Model Years:
VIN:
from
to
Engine:
Transmissions:
Cadillac
ATS With RPO Y66
2013 - 2019
ALL
ALL
ALL
ALL
Cadillac
CTS Sedan (VIN A) With RPO Y66
2014 - 2019
ALL
ALL
ALL
ALL
Cadillac
SRX With RPO PCX
2013 - 2016
ALL
ALL
ALL
ALL
Cadillac
XTS With RPO PCX
2013 - 2019
ALL
ALL
ALL
ALL
Supersession Statement
This PI was superseded to update Model Years. Please discard PIC6013D.
The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition / Concern
A customer may comment they receive an "ADAPTIVE CRUISE TEMPORARILY UNAVAILABLE"
message on the DIC when attempting to activate the cruise.
Other possible messages may include, Park Assist Symbols Unavailable, Lane Departure
Warning Unavailable and Rear Auto Braking Unavailable.
Recommendations / Instructions
If normal diagnostics lead to a concern that can be duplicated and there are no DTCs present,
the concern is most commonly caused by one of the following issues.
Perform the yaw rate sensor learn procedure (Multi Axis Sensor), clear any DTCs that may
have set during programming, and let vehicle go to sleep before evaluating the concern.
NOTE: For Adaptive Cruise Temporarily Unavailable only: The majority of the vehicles will be
resolved by performing the Multi Axis Sensor learn. If the concern has not been
resolved, perform the Long Range Radar Learn called-out in the Radar Sensor Module - Long
Range Programming and Setup procedure in Service Information.
Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the
following labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for
coverage information.
Labor Operation
Description
Labor Time
2880288*
Relearn Multi Axis Sensor (YAW Sensor)
0.3 hr
Add
Relearn Long Range Radar
0.5 hr
* This is a unique labor operation for bulletin use only.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is
resolved without completing every step, the remaining steps do not need to be performed.
© 2019 General Motors. All Rights Reserved.


© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.