TT 21 18 02

Technical Tips
Technical Tip
Topic
21-18-02TT - Rattle from the Turbocharger Charge Air Pressure Actuator -V465-
Market area
United States 444 Volkswagen of America, Inc. (6444)
Brand
Volkswagen
Date
November 16, 2018
Condition
ATTENTION:
THIS IS A TECH TIP, NOT A TECHNICAL BULLETIN.
TECH TIPS ARE NOT ASSOCIATED WITH WARRANTY CLAIMING.
Rattle from the Turbocharger Charge Air Pressure Actuator -V465Model(s)
Year
Jetta
2016-2017
Eng. Code
Trans. Code
VIN Range From
VIN Range To
All
All
All
1.4L
(CZTA)
Technical Background
Turbo charger rattle from the pivot on the waste gate actuator rod.
Service
For rattle noises from the Charge Air Pressure Actuator -V465-with no DTC’s, check to see if the pivot pin in the
actuator rod is loose and causing the rattle. If the rattle goes away when pressure is applied to the pivot pin, use a
retaining clip (06J-145-220-A, the same clip that was used on the CCTA turbos) to secure the rod. Part numbers are
for reference only. Make certain the parts catalog is referenced to obtain the latest applicable component.
Additional Information
Revision History
Revision Number
Released Date
Reason For Update
2052994/1
11/16/18
Original publication.
© 2018 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on
the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make
changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may
these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
1