PS613

SUBJECT:
GROUP
Electrical
MODEL
2017-2020MY
All Listed Models
NUMBER
PS613
DATE
June 2019
INSTRUMENT CLUSTER REPLACEMENT,
MILEAGE SETTING WITH KDS
This pitstop provides the KDS service procedure for mileage setting on 17MY~ Cadenza (YG),
17MY~ Forte (YD/YDm), 19MY~ (BDm), 19MY~ K900 (RJ), 17MY~ Sedona (YP), 17MY~
Sorento (UMa), 20MY~ Soul (SK3), 20MY~ Telluride (ON) with newly replaced instrument
clusters. Certain models allow for mileage setting with the KDS, which prevents the need to
send out the instrument cluster to a 3rd party for mileage adjustment (refer to PS264). After a
new cluster is installed, cluster (variant) coding may also need to be conducted using the KDS.
Make sure the KDS software is also updated to the latest version. Mileage setting should be
performed by using the KDS only, as described in this bulletin.
Model Year
Vehicle
Comments
17-19MY
Cadenza (YG)
19-20MY
Forte (BDm)
19-20MY
K900 (RJ)
20MY
Soul (SK3)
20MY
Telluride (ON)
17-18MY
Forte (YD, YDm)
17-20MY
Sedona (YP)
17-19MY
Sorento (UM)
Follow the procedure outlined on
page 2 and 3 of this bulletin.
Page 1 of 3
Refer to TSB ELE106 on KGIS for “Service
Procedure” instructions outlined on page 2
Steps 1-5 of the bulletin.
Setting the Mileage Procedure:
1. With the VCI-II connected to the
vehicle, touch S/W Management on
KDS home page.
2.
Select Cluster Module and select
Setting Mileage (when replacing
with a new cluster).
3.
Verify the VIN shown on the KDS S/W
Management screen and select OK.
Page 2 of 3
4.
Input the vehicle mileage recorded
from the previous cluster and select
OK.
CAUTION
Once the mileage is registered,
it cannot be modified.
Before selecting OK, verify that
the input mileage is correct to
avoid another (unnecessary)
replacement.
5.
Touch OK to return to the S/W
Management menu then verify that
the mileage displayed on the new
cluster is correct.
6.
Reprogram the customer’s
presets if necessary.
radio
Page 3 of 3