NTB19-044

Classification:
AT19-006
Reference:
Date:
NTB19-044
June 13, 2019
ENGINE SUPPORT TOOLS
APPLIED VEHICLES:
2016-2019 Maxima (A36)
SERVICE INFORMATION
A new Engine Support Tool and Engine Support Bracket are now available to allow the
CVT to be removed from the Applied Vehicles without having to remove the engine.
The procedure in this bulletin is different from the procedure currently in the Electronic
Service Manual (ESM), which will be updated with this information at a later date.
Please refer to the SERVICE PROCEDURE on page 2 to use these new tools.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/21
SERVICE PROCEDURE
2/21
NTB19-044
3/21
NTB19-044
4/21
NTB19-044
5/21
NTB19-044
6/21
NTB19-044
7/21
NTB19-044
8/21
NTB19-044
9/21
NTB19-044
10/21
NTB19-044
11/21
NTB19-044
12/21
NTB19-044
13/21
NTB19-044
14/21
NTB19-044
15/21
NTB19-044
16/21
NTB19-044
17/21
NTB19-044
18/21
NTB19-044
19/21
NTB19-044
20/21
NTB19-044
CLAIMS INFORMATION
DESCRIPTION
CVT R&I
OP CODE
JD01AA
FRT
(1)
(1) The new procedure in the bulletin will alter the Flat Rate Time (FRT) for operations
involving removal of the CVT from the vehicle. Refer to the current Nissan Warranty
Flat Rate Manual for current FRTs.
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
June 13, 2019
NTB19-044
DESCRIPTION
Original bulletin published.
21/21
NTB19-044