A9019202048009_4
Service Bulletin Details
Public Details for: A9019202048009_4
This bulletin contains software update instructions for when there is a parking brake message (no functional issue) without any dtc's logged.
Models from 2018
2018 AUDI Q5 |
Models from 2017
2017 AUDI A3 |
2017 AUDI A3 CABRIOLET |
2017 AUDI A4 |
2017 AUDI A4 ALLROAD |
2017 AUDI A5 |
2017 AUDI Q7 |
2017 AUDI R8 |
2017 AUDI R8 SPYDER |
2017 AUDI TT |
2017 AUDI TT ROADSTER |
90 Instrument cluster message "Parking brake: malfunction!" 90 19 20 2048009/4 July 2, 2019. Supersedes Technical Service Bulletin Group 90 number 17-83 dated October 5, 2017 for reasons listed below. Model(s) Year VIN Range Vehicle-Specific Equipment Q7 2017 000001 - 045840 With Audi virtual cockpit TT 2017 000001 – 015322 And With Audi virtual cockpit 900001 - 915322 R8 2017 900001 - 904545 With Audi virtual cockpit Q5 2018 All With Audi virtual cockpit A3, A4, and A5 2017 All With Audi virtual cockpit Condition REVISION HISTORY Revision Date Purpose 4 - Revised header (Corrected Elsa display issue) Revised Service (Added SVM table) Revised Warranty (Add Labor Operation) 3 10/05/2017 Revised header (Corrected Elsa display issue) 2 08/25/2017 Revised header (Added Q5) Revised Service (Added Q5) Revised Required Parts and Tools (Added Q5) Customer states: They receive a message "Parking brake: problem! Safely turn off the vehicle, See service" is shown and then goes away. Workshop findings: The concern cannot be reproduced and the customer does not experience a functional issue. There are no DTCs relating to the concern. Page 1 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Background The software needs to be updated. Production Solution Updated software implemented into production. Service SVM Update Instructions 1. Follow all instructions in TSB 2047812: 00 SD Creator: How to setup and use the SD Creator for obtaining vehicle software updates via the MirrorServer. 2. Update the instrument cluster using the SVM action code as listed in the table below, if necessary: Model Q7 Old Software Old Part Number Software Version 4M0920790B 4M0920794B 4M0920890B 4M0920894B R8 4S0920790A 4S0920890A A4/A5/Q5 A3 0300 0302 0306 0249 (or higher) 4M0920790B 4M0920794B 4M0920890B 4S0920790A 4S0920890A 0299 8W5920790C 8W5920890C 0307 8W5920890C 8V0920790 0044 8V0920890 8V0920794 0045 8V0920794 8S0920890B FPKWW310Q7 0253 FPKWW253R8 0313 FPKWW313B9 0047 FPKWW047A3Q2 0296 FPKWW296TT 8V0920790 8V0920890 8S0920790B 0310 4M0920894B 8W5920790C 8V0920894 TT New Software New Software SVM Code Input Part Number Version 8V0920894 0290 8S0920790B 8S0920890B Page 2 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Warranty Claim Type: 110 up to 48 Months/50,000 Miles. G10 for CPO Covered Vehicles – Verify Owner. If the vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 9025 Damage Code: 0039 Labor Operations Software Update 0151 0000 Diagnostic Time: GFF No allowance 0 TU Road test prior to service procedure No allowance 0 TU Road test after service procedure No allowance 0 TU Claim Comment: Time stated on diagnostic protocol (Max 40 TU) As per TSB #2048009/4 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools If necessary, order in advance the SD card for the model or install the software to an SD card with the specifications SDHC or SDXC via the SD Creator: Always check with your Parts Department and/or ETKA for the latest information and parts bulletins. Model SD card Quantity Q7 8S0906961AJ 01 (per dealer) R8 8S0906961AF 01 (per dealer) A4/A5/Q5 8S0906961AG 01 (per dealer) A3 8S0906961AH 01 (per dealer) TT 8S0906961AE 01 (per dealer) Page 3 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Additional Information The following Technical Service Bulletin(s) will be necessary to complete this procedure: TSB 2047812, 00 SD Creator: How to setup and use the SD Creator for obtaining vehicle software updates via the MirrorServer. All part and service references provided in this TSB (2048009) are subject to change and/or removal. Please check the Repair Manual for fasteners, bolts, nuts, and screws that require replacement during the repair. ©2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Page 4 of 4 © 2019 Audi of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.