A18-080
Service Bulletin Details
Public Details for: A18-080
Service bulletin - the a/c does not blow cold air, and the lower corner of the condenser around the receiver/dryer cap is stained.
Models from 2019
2019 HONDA PASSPORT |
2019 HONDA PILOT |
2019 HONDA RIDGELINE |
Models from 2018
2018 HONDA PILOT |
2018 HONDA RIDGELINE |
Models from 2017
2017 HONDA PILOT |
2017 HONDA RIDGELINE |
Models from 2016
2016 HONDA PILOT |
Service Bulletin 18-080 July 16, 2019 Version 5 A/C Does Not Blow Cold Air and Condenser Leaks at Receiver Dryer Cap Supersedes 18-080, dated May 3, 2019, to revise the information highlighted in yellow AFFECTED VEHICLES Year Model Trim VIN Range 2016-18 Pilot ALL ALL 2019 Pilot 2WD 5FNYF5...KB000001 thru 5FNYF5...KB042834 2019 Pilot AWD 5FNYF6...KB000001 thru 5FNYF6...KB090910 2017-18 Ridgeline ALL ALL 2019 Ridgeline 2WD 5FPYK2...KB000001 thru 5FPYK2...KB007659 2019 Ridgeline AWD 5FPYK3...KB000001 thru 5FPYK3...KB039623 2019 Passport 2WD 5FNYF7...KB000001 thru 5FNYF7...KB007708 2019 Passport AWD 5FNYF8...KB000001 thru 5FNYF8...KB019991 REVISION SUMMARY Under AFFECTED VEHICLES, the VIN range expanded to all 2018 Pilot models. 2019 Ridgeline, Passport, and Pilot were added. Under PARTS INFORMATION, the part number was changed. Under WARRANTY CLAIM INFORMATION, the Operation Number for "Evacuate and recharge the A/C system" was changed. SYMPTOM The A/C does not blow cold air, and the lower corner of the condenser around the receiver/dryer cap is stained. POSSIBLE CAUSES There is poor O-ring compression against the receiver/dryer barrel wall. CORRECTIVE ACTION Remove the A/C condenser, and replace the filter sub-assembly. Then, recharge the A/C system. CUSTOMER INFORMATION:The information in this bulletin is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely maintain your vehicle. These procedures should not be attempted by “do-it-yourselfers,” and you should not assume this bulletin applies to your vehicle, or that your vehicle has the condition described. To determine whether this information applies, contact an authorized Honda automobile dealer. © 2019 American Honda Motor Co., Inc. — All Rights Reserved Page 1 of 4 PARTS INFORMATION Part Name Part Number Quantity Filter Sub-Assembly 80101-TG7-A02 1 REQUIRED MATERIALS Part Name Part Number Quantity POE Oil: Delphi RL85HM 38899-RLV-A01 1 WARRANTY CLAIM INFORMATION The normal warranty applies. Pilot, Passport, and Ridgeline without Honda Sensing Operation Number 6161G3 620025 Description Flat Rate Time Remove the A/C condenser, and replace the filter sub-assembly. 2.2 hrs Evacuate and recharge the A/C system. 0.7 hr Defect Code 07406 Symptom Code 03220 Template ID Failed Part Number A18080A 80100-TG7-A01 Template ID Failed Part Number A18080B 80100-TG7-A01 Pilot and Passport with Honda Sensing Operation Number 6161G3 M 620025 Description Flat Rate Time Remove the A/C condenser, and replace the filter subassembly. 2.2 hrs Radar aiming- add 1.4 hrs Evacuate and recharge the A/C system. 0.7 hr Defect Code 07406 Symptom Code 03220 Page 2 of 4 Ridgeline with Honda Sensing Operation Number 6161G3 M 620025 Description Flat Rate Time Remove the A/C condenser, and replace the filter subassembly. 2.2 hrs Radar aiming- add 0.9 hr Evacuate and recharge the A/C system. 0.7 hr Defect Code 07406 Symptom Code 03220 Template ID Failed Part Number A18080C 80100-TG7-A01 Skill Level: Repair Technician INSPECTION PROCEDURE Check if the A/C is blowing cold air and there is staining around the receiver dryer cap on the condenser. • If the A/C is not blowing cold air and there is staining around the receiver dryer cap on the condenser, go to REPAIR PROCEDURE. • If the A/C is not blowing cold air and there is no staining around the receiver dryer cap, continue with normal system troubleshooting. REPAIR PROCEDURE 1. Recover the A/C refrigerant from the system. Refer to the service information. 2. Remove the A/C condenser from the vehicle. Refer to the service information. 3. Thoroughly clean the stain from the affected area on the condenser. Page 3 of 4 4. Remove the sub-assembly (cap, filter, and desiccant bag) from the condenser. NOTES • Install the new desiccant bag as quickly as possible to prevent the system from absorbing moisture from the air. • You will need to add 10 ml of refrigerant oil (P/N 38899-RLV-A01) with the replacement of the desiccant bag. • Do not over tighten the plastic receiver/dryer cap; it could get stripped. 5. Wipe the interior threads and sealing area of the receiver/dryer barrel with a lint-free cloth to remove all debris. 6. Apply a thin layer of refrigerant oil to the O-rings. Then install the new filter sub-assembly, and torque the cap to 12 N·m (9 lb-ft). 7. Install the A/C condenser. Refer to the service information. 8. Evacuate and recharge the A/C system. Refer to the service information. 9. Make sure the A/C system is operating properly. 10. With Honda Sensing: Do the millimeter wave radar aiming procedure. Refer to service information. NOTE The millimeter wave radar aiming procedure must be done whenever the millimeter wave radar is removed or replaced. END Page 4 of 4