20A3S3RS3TECHREP

2020
A3/S3/RS 3
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify Audi Phone Box Customer Registration form is present in car and fill out “Serial Number” field. Check Elsa
“Vehicle Information” Section or location sticker on car.
See TSB 2051720
 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*
 Perform any open campaigns*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable repair kit and compressor are present (RS 3
only)
 Verify temporary inflatable spare tire is present (A3 Sedan
and S3 FWD only)*
 Check battery clamps for proper torque*
 Perform diagnostic work*
Interior
Exterior
 Check all key buttons and features*
 Inspect the outer door seals at all four doors and clean any
visible adhesive using D 002 000 A2 Adhesive Remover or
Acetone
 Verify operation of all seat belts and latches
 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
 Verify operation of all interior lights
Lighting and Windshield
 Verify proper operation of climate control*
 Test exterior lighting functions
 Inspect operation of all power outlets*
 Test windshield washers (and headlight washers on S3/RS 3).
Correct aim if necessary*
 Check panoramic sunroof and sunshade operation (Sedan
only)*
 Verify operation of heated seats
 Verify operation of manual folding 2nd row
 Verify the glove compartment opens and closes properly
Trunk Inspection
 Verify trunk is operational
 Verify operation of front Passenger Occupant Detection
System
 Verify operation of emergency release handle
Effective 8-22-2019-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 1
2020
A3/S3/RS 3
Audi Pre-Delivery Inspection
Settings
Driving Performance (continued)
 Verify operation of MMI® touch (if equipped)
 Verify engine performance and acceleration*
 Set time source setting to “GPS” (if equipped) and set auto
daylight savings time to “on” *
 Verify transmission operation, including shift paddles (if
equipped)
 Set Time to “Automatic setting” and “Automatic time zone”
 Test drive vehicle applying brakes several times*
 Verify and set language and measurement units*
 Check steering/tire alignment
 Verify Speech Dialog System is operating (if equipped)*
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Set “Entertain. Fad.” in parking aid to an audible level (if
equipped)*
 Set dealership location in navigation (if equipped)*
 Turn off Manual Speed Warning*
 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
Media / Radio / SAT
Driver Assistance
 Verify operation of all USB ports
 Verify cruise control/ACC functionality (if equipped)
 Verify operation of aux. input
 Verify Audi side assist functionality (if equipped)
 Verify operation of CD/DVD player (if equipped)
 Verify Audi side assist with with rear cross traffic assist (if
equipped)
 Insert SD card and test function of slots
 Program the presets to local stations
 Verify HD Radio is turned “off”*
Audi connect (USA ONLY) (if equipped)
®
 Turn on the Wi-Fi® hotspot (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Verify Audi active lane assist functionality (if equipped)
 Verify operation of Audi parking system (if equipped)*
 Verify operation of High beam assist (if equipped)
 Activate navigation and follow directions back to dealership
(if equipped)
Post-Road Test Inspection
 Enable Google Earth view for navigation (if equipped)*
 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
On-Hoist Inspection
 Select reset interval in the MIB Service and Checks menu if it
is not displaying correct 10K and 20K intervals
 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check service interval and verify correct interval is displayed
 Check engine oil level*
 Check all fluid levels and top off if necessary
 Check underside of vehicle for fluid leaks and loose components
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Inspect wheel bolts for proper torque*
 Apply 30 Day Inventory Maintenance Sticker**
 Install wheel locks (if equipped)
 Install showroom charger to ensure battery remains
charged at all times**
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Must fuel with 91 Octane or higher (S3, RS 3)
Driving Performance
 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
Effective 8-22-2019-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 2
2020
A3/S3/RS 3
Audi Pre-Delivery Inspection
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 8-22-2019-US
Version 1.0
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3