20Q5SQ5TECHREP

2020
Q5/SQ5
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Perform any open campaigns*
 Verify Audi Phone Box Customer Registration form is present in car and fill out “Serial Number” field. Check Elsa
“Vehicle Information” Section or location sticker on car.
See TSB 2051720
 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*
 Perform any open campaigns*
 Perform diagnostics work*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable spare tire and compressor are present
 Set spare tire pressure*
 Check battery clamps for proper torque*
 Verify operation of luggage cover
Interior
 Verify operation of all seat belts and latches
Exterior
 Check operation of window, lock, and seat controls*
 Check all key buttons and features*
 Inspect mirrors for proper operation*
 Check all doors for proper power closing (if equipped)*
 Check rear view mirror operation*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
 Verify operation of all interior lights
 Prepare the base bars for customer delivery (install bars
only upon customer request)*
 Check heated steering wheel operation (if equipped)
 Verify SOS button is green and Roadside assistance button
LED will remain off. Reference TSB 2052299 if issues occur
 Verify operation of heated seats
Lighting and Windshield
 Verify operation of ventilated seats (if equipped)
 Test exterior lighting functions
 Verify operation of rear heated seats (if equipped)
 Test windshield washers. Correct aim if necessary
 Verify operation of manual folding 2nd row
Trunk Inspection
 Verify power tailgate is operational and set default opening
height*
Effective 8-22-2019-US
Version 1.0
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Check panoramic sunroof and sunshade operation (if
equipped)*
PRE-DELIVERY INSPECTION (PDI) | 1
2020
Q5/SQ5
Audi Pre-Delivery Inspection
Interior (continued)
Driving Performance
 Verify the glove compartment opens and closes properly
 Check horn operation
 Verify operation of front Passenger Occupant Detection
System
 Verify hold and release of electronic parking brake
Settings
 Verify operation of MMI® touch pad (if equipped)
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
 Test drive vehicle applying brakes several times*
 Check adaptive air suspension in all positions (if applicable)
 Check steering/tire alignment
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Set “Music volume while parking” to 6 lines*
 Calibrate rear view mirror*
 Set dealership location in navigation (if equipped)*
 Verify quality of radio reception in AM/FM/SiriusXM® bands
 Verify Speech Dialog System is operating*
 Turn off Manual Speed Warning (if equipped)*
Driver Assistance
Media / Radio / SAT
 Verify operation of all USB ports
 Verify cruise control/ACC with Stop & Go functionality (if
equipped)
 Verify operation of AMI or aux. input (if equipped)
 Verify Audi side assist functionality (if equipped)
 Verify operation of CD/DVD player (if equipped)
 Verify Audi side assist functionality Pre sense® rear (if
equipped)
 Insert SD card and test function of all slots
 Program the presets to local stations
 Verify HD Radio is turned “off”*
 Verify Audi active lane assist functionality (if equipped)
 Verify operation of parking system (if equipped)*
 Verify operation of Traffic Sign Recognition (if equipped)
Audi connect® (USA ONLY) (if equipped)
 Verify all vehicle Head-up display functionality (if equipped)*
 Turn on the Wi-Fi® hotspot (if equipped)*
 Verify operation of High-beam assist
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Activate NAV and follow directions back to dealership (if
equipped)
 Enable Google Earth view for navigation (if equipped)*
On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)
Post-Road Test Inspection
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check engine oil level*
 Check underside of vehicle for fluid leaks and loose components
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Install wheel locks (if equipped)
 Apply 30 Day Inventory Maintenance Sticker**
 Install wheel bolt covers and center caps as supplied*
 Install showroom charger to ensure battery remains
charged at all times**
 Inspect wheel bolts for proper torque*
 Check all fluid levels and top off if necessary
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Effective 8-22-2019-US
Version 1.0
PRE-DELIVERY INSPECTION (PDI) | 2
2020
Q5/SQ5
Audi Pre-Delivery Inspection
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 8-22-2019-US
Version 1.0
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 3