SFCC_JUN19_Slide

Service Bulletin Details

Public Details for: SFCC_JUN19_Slide

Restricted performance with or without dynamic stability control message on instrument cluster.


- 2019 -

Models from 2019
2019 JAGUAR I-PACE 
Latest Vehicle Concern Fixes
Restricted Performance & Dynamic Stability Control Message
Customer Voice:
• Restricted Performance with or without Dynamic Stability Control message on
Instrument Cluster.
Technical Description:
• This message may be paired with P0A2A, P0A2B, or P0A2D for Drive Motor “A’
Temperature Sensor Circuit stored in either both or either EPIC B or C.
Status:
• Under investigation
• Follow TOPIx & Pathfinder Guided Diagnostics.
• Inspect all the connectors at the EPIC and the EDU including the HV Cables. Inspect
connectors for damaged & check to confirm there isn’t any coolant in the HV 3 phase
connector at the EDU. Check Fuse 32 for rear inverter & Fuse 17 for front inverter.
• Should parts be replaced, please raise an EPQR with the parts manager information
19MY I-PACE

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.