B661719

9/4/2019
66 17 19_ACTIVE PARK DISTANCE CONTROL (PDC): UNDESIRED BRAKING
SIB 66 17 19
ACTIVE PARK DISTANCE CONTROL (PDC): UNDESIRED BRAKING
2019-08-29
MODEL
E-Series
G01
Model Description
X3 Sports Activity Vehicle
Production Date
From August 1, 2017
G02
X4 Sports Activity Coupe
From April 1, 2018
Affected Option Code / Engine
5DM (Parking Assistant)
Or
5DN (Parking Assistant Plus)
SITUATION
The vehicle applies the brakes on its own when reversing onto an inclined roadway or driveway. This
applies only to the situation where the Active PDC option is activated via the iDrive.
CAUSE
Software of the ultrasonic sensors and PDC control unit.
CORRECTION
Perform coding only conversion to modify the vehicle order (VO) and add “PDCD”.
PROCEDURE
1.
2.
3.
4.
Duplicate the issue.
Perform diagnosis with ISTA 4.18.1 or higher.
Complete test plan for related fault codes stored.
With vehicle connected to ISTA 4.18.1x or higher- Go to conversions
- Select “PDC ground detection when reversing”
- Perform coding only conversion to add “PDCD” to the VO
5. Also refer to TRI B66 11 18, which contains information on the limitation of PDC system.
Always connect a BMW-approved battery charger/power supply (SI B04 23 10) when performing
programming.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.
Control unit, Park Distance Control (PDC) software
error/internal equipment fault
Defect Code:
6620010200
Labor Operation
Description
Labor Allowance
00 00 006
Performing vehicle test (with vehicle diagnosis system –
checking faults) (Main work)
Refer to AIR
Performing vehicle test (with vehicle diagnosis system –
checking faults) (Plus work)
Refer to AIR
Connect an approved battery charger/power supply (indicated
in AIR as Charging battery)
Refer to AIR
Or:
00 00 556
And:
61 21 528
Copyright ©2019 BMW of North America, Inc.
1/2
9/4/2019
66 17 19_ACTIVE PARK DISTANCE CONTROL (PDC): UNDESIRED BRAKING
And, as necessary:
61 00 006
Performing vehicle diagnosis – test module
Work time (WT)
Perform conversion to add K word “PDCD” to vehicle order
1 FRU
And:
66 20 000
If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of
00 00 006.
Refer to AIR for the corresponding flat rate unit (FRU) allowances.
Work time labor operation code 61 00 006 is not considered a Main labor operation; however, it does require
an individual punch time.
Work time labor operation code 66 20 000 is also not considered a Main labor operation and since the work
time FRU allowance to be claimed is specified, a separate punch time is not required.
However, both work time labor operations still require an explanation on the repair order and in the claim
comments section.
Copyright ©2019 BMW of North America, Inc.
2/2