ITB18-040c
Service Bulletin Details
Public Details for: ITB18-040c
Software updates for infotainment issues this bulletin has been amended. See amendment history on the last page. Discard all previous versions of this bulletin.
Models from 2018
2018 INFINITI Q50 |
2018 INFINITI Q50 HYBRID |
2018 INFINITI Q60 |
2018 INFINITI Q70 |
2018 INFINITI Q70 HYBRID |
2018 INFINITI QX30 |
2018 INFINITI QX60 |
2018 INFINITI QX60 HYBRID |
2018 INFINITI QX80 |
Models from 2017
2017 INFINITI Q50 |
2017 INFINITI Q50 HYBRID |
2017 INFINITI Q60 |
2017 INFINITI QX30 |
2017 INFINITI QX60 |
2017 INFINITI QX60 HYBRID |
Models from 2016
2016 INFINITI Q50 |
2016 INFINITI Q50 HYBRID |
Classification: Reference: Date: EL18-023c ITB18-040c September 6, 2019 SOFTWARE UPDATES FOR INFOTAINMENT ISSUES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin. APPLIED VEHICLES: 2016-2018 Q50 (V37) 2016-2018 Q50 Hybrid (V37) 2017-2018 Q60 (V37) 2018 Q70 (Y51) 2018 Q70 Hybrid (Y51) 2017-2018 QX30 (H15) 2017-2018 QX60 (L50) 2017-2018 QX60 Hybrid (L50) 2018 QX80 (Z62) IF YOU CONFIRM Any one or a combination of the following on an applied vehicle: Reverse camera is blank (vehicles manufactured before May 1, 2018) Reverse camera remains ON when in Drive (vehicles manufactured before May 1, 2018) Average fuel economy displays 99.9 MPG Display screen flickers at higher ambient interior temperatures SXM Info Apps (Weather, Stocks, Fuel Prices) inoperative ACTION 1. To confirm an update applies to the Display Control Unit (DCU) of the vehicle being worked on, you MUST refer to page 4, step 8, AND page 14, Figure 19 in the SERVICE PROCEDURE. IMPORTANT: Confirmation is determined by performing the following two steps. 1. Comparing the DCU part number with those listed in Table A on page 5, AND 2. Verifying new software is required as shown on page 14, Figure 19. 2. If this bulletin applies, update the DCU software. See REQUIRED SPECIAL TOOL on page 2. NOTE: The updated software resolves the items above along with improving software stability. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it contains information that is essential to successfully completing this repair. Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this applies to your vehicle. 1/16 REQUIRED SPECIAL TOOL One of special tool USB drive J-52727 has been shipped to each dealer (see Figure 1). Do not use any other USB drive to perform the procedure in this bulletin. Additional USB drives may be purchased from Tech•Mate (1-800-662-2001). Figure 1 SERVICE PROCEDURE Check the DCU (P/N) IMPORTANT: Before starting, make sure: ASIST is connected to the Internet. 1. 2. 3. 4. ASIST on the CONSULT PC has been synchronized (updated) to the current date. Connect the CONSULT PC and plus VI to the vehicle. Start CONSULT-III plus (C-III plus). Turn ON the ignition. Wait for the plus VI to be recognized / connected. The serial number will display when the plus VI is recognized / connected. 5. Select Diagnosis (One System). Figure 2 2/16 ITB18-040c 6. Select MULTI AV. Figure 3 3/16 ITB18-040c 7. Select the ECU Identification tab. 8. When the screen in Figure 4 displays, confirm this bulletin applies as follows: a. Write down the ECU PART NUMBER on the repair order. NOTE: This is the current DCU part number (P/N). XXXXX XXXXXXXX Figure 4 b. Compare the P/N written down to the P/Ns in the CURRENT DCU PART NUMBER column in Table A on the next page. If there is a match, proceed to step 9 on page 6. If there is not a match, DCU updating does not apply. Refer to ASIST for further diagnosis. 4/16 ITB18-040c Table A MODEL MODEL YEAR 2016 Q50 and Q50 Hybrid CURRENT DCU PART NUMBER: 283874HK0A, 4HK2A 4HK0C, 4HK2C 4HK0D, 4HK2D 2017 4HK1A, 4HK3A 4HK4A, 4HK5A 2018 4HK4B, 4HK5B 4HK0B, 4HK2B 2017 4HK1A, 4HK3A Q60 4HK4A, 4HK5A 2018 4HK4B, 4HK5B 6GY01, 6GY1A Q70 and Q70 Hybrid QX30 6GY0B, 6GY1B 2018 5ZA0D 2017 2018 QX60 and QX60 Hybrid 6GY0E, 6GY1E 9PB0E 4DL0A, 4DL1A, 4DL2A, 4DL3A, 4DL6A, 4DL7A 4DL4A, 4DL5A, 4DL8A, 4DL9A 5ZA0A, 5ZA0B 2017 9PB0A, 9PB0D 6GY0A, 6GY0B, 6GY0E 2018 6GY1A, 6GY1B, 6GY1E 6GY0A, 6GY0B, 6GY0E QX80 6GY1A, 6GY1B, 6GY1E 2018 5ZA0D 9PB0E 5/16 ITB18-040c Update the Display Control Unit IMPORTANT: Before starting, make sure: ASIST is connected to the Internet. ASIST has been synchronized (updated) to the current date. 9. Insert special tool USB drive J-52727 to an ASIST Station. HINT: Special tool USB drive J-52727 is the only one approved for use with this procedure. 10. Open ASIST. 11. Select Specialty Tools, and then select Infotainment Software Updates. Specialty Tools Infotainment Software Updates Figure 5 6/16 ITB18-040c 12. Select the check box next to the correct update software package based on Table B below (see Figure 6). HINT: Use the scroll bar, if needed, to find the correct update software package. Failure to select the correct update software package may result in needing to replace the DCU. HINT: Replacement of an incorrectly updated DCU is not covered under warranty. Table B * MODEL AUDIO SYSTEM DESCRIPTION 2017-2018 QX60, 2017-2018 QX60 Hybrid, 2018 Q70, 2018 Q70 Hybrid, and 2018 QX80 CD capable * IT5001 2017-2018 QX60, 2017-2018 QX60 Hybrid, and 2018 QX80 Rear Entertainment system with CD and DVD capability * IT5002 2016-2018 Q50, 2016-2018 Q50 Hybrid, and 2017-2018 Q60 CD capable IT5003 2017-2018 QX30 CD capable * IT5005 If you are unsure which audio system the vehicle is equipped with, insert a DVD into the instrument panel mounted AV control unit. With CD only audio systems, an error message will display on the screen. In CD/DVD capable systems, the DVD will work. 13. Use the drop-down menu and select the location of the USB drive that was inserted in step 9. HINT: The Description section in Figure 6 may show differently than your C-III plus screen. Check box Drop-down menu XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXX Infotainment software updates XXXX USB drive location XXXXXXXXX XXXXX Scroll bar XXXXXXXX Figure 6 14. Select Download, and then wait for the download to complete. 7/16 ITB18-040c 15. Select OK. E:\ Copy Process Completed Figure 7 16. Once the transfer is complete, safely remove the USB drive from the ASIST Station. a. From the PC toolbar, select the Safely Remove Hardware icon. The icon is on the toolbar, or to be found after selecting the arrow. b. Select the USB drive to be removed, and then remove the USB drive from the ASIST Station. Follow the steps to safely remove the USB drive. If not followed, the USB drive may corrupt the infotainment update software. If you are not familiar with the process of safe USB drive removal, ask for assistance at your dealer. Safely Remove Hardware icon USB Drive (E:) Arrow on toolbar Figure 8 17. Close all ASIST Infotainment Software Update screens. 18. Start the engine, and then wait 60 seconds for the system to load. HINT: The engine needs to idle for the duration of the update to retain battery charge. 8/16 ITB18-040c 19. Open the Settings Menu, and then select Bluetooth. The Settings menu is accessed with the hard button located under the display. Figure 9 20. Select Connect Device from the Bluetooth Settings menu. HINT: If no connected devices are present, Figure 16 (page 12) will display. Figure 10 9/16 ITB18-040c 21. Check for devices in the Device List: YES, one or more devices are listed: Select a device, and then proceed to step 22. NO, there are no listed devices: Skip to step 24. IMPORTANT: All paired (listed) devices must be deleted before proceeding to step 24. Figure 11 22. Select Delete and confirm the screens in Figure 13 and then Figure 14 are displayed. Figure 12 10/16 ITB18-040c HINT: The following screens will be displayed while a paired device is being deleted. The first screen will show “Deleting…” followed by the device name. Figure 13 The second screen will show information regarding repairing the Bluetooth® device. Figure 14 11/16 ITB18-040c 23. Check for additional devices in the Device List: YES, there are more listed devices: Perform steps 21 and 22 until all listed devices are deleted. NO, there are no listed devices: Proceed to step 24. IMPORTANT: All paired (listed) devices must be deleted before proceeding to step 24. Example of one device present Figure 15 Figure 16 will be displayed when all listed devices have been deleted. Example of no devices present Figure 16 12/16 ITB18-040c 24. Insert the USB drive with infotainment update software into the vehicle’s USB media port (see Figure 17). Do not remove the USB drive during the update to the vehicle until instructed. HINT: Charging ports are marked in the vehicle with a “lightning bolt” symbol. Do not insert the USB drive into a charging port. If used, the update software and/or USB drive may become damaged. Only insert the USB drive in a USB media port. USB media port symbol DO NOT USE USB ports with a “Lightning bolt”! Figure 17 Figure 18 13/16 ITB18-040c 25. Wait approximately 10-30 seconds for the screen in Figure 19 or Figure 20 to appear. If the screen shown in Figure 19 appears, proceed to step 26 below. If the screen shown in Figure 20 appears, then no software update is available. Refer to ASIST for further diagnostic information. Figure 19 Figure 20 26. Select Yes to begin the software update. 14/16 ITB18-040c 27. Wait for the update to complete. Follow the on-screen instructions while waiting. HINT: The update lasts 10-70 minutes. Figure 21 28. Once the update is complete, remove the USB drive, and then select Restart. Figure 22 15/16 ITB18-040c Steps 29-32 must be completed. If they are not completed, the update may become corrupted. 29. Allow the reboot to complete (2-5 minutes after selecting Restart). 30. Once the reboot has completed, turn OFF the engine, and then wait three (3) minutes. 31. Start the engine and allow the vehicle to run for two (2) minutes. 32. Turn OFF the engine. CLAIMS INFORMATION Submit a Primary Part (PP) type line claim using the following claims coding: DESCRIPTION PFP OP CODE SYM DIA FRT Perform Software Update (1) RX6SAA ZE 32 0.5 (1) Reference the Electronic Parts Catalog (EPC), and use the Display Control Assy (28387-*****) as the Primary Failed Part (PFP). AMENDMENT HISTORY PUBLISHED DATE REFERENCE DESCRIPTION December 2, 2018 ITB18-040 Original bulletin published December 19, 2018 ITB18-040a Amended to add Bluetooth® device deletion procedure March 19, 2019 ITB18-040b Added part numbers to Table A, added Figure 20, and modified the ACTION statement on page 1 September 6, 2019 ITB18-040c SERVICE PROCEDURE amended throughout 16/16 ITB18-040c