18JettaServXprs

2018 Jetta
Engine
1.4L CZTA
Part
Part Number
Quantity
Oil Filter
VW 502 00 Use synthetic oil
SAE 5W-40, SAE-5W-30
04E 115 561 H
1
N/A
4.0L (4.2qt)
Air Filter
N 902 889 01
N 013 815 7
04E 129 620
Engine
Part
Part Number
Quantity
06K 115 562
1
2.0L Turbo GLI: CPLA,
CPPA
Oil Filter
VW 502 00 Use synthetic oil
SAE 5W-40, SAE-5W-30
Drain Plug Gasket
N/A
5.5L (5.8qt)
N 911 679 01
1
Air Filter
5C0 129 620
1
Part
Part Number
Quantity
Pollen Filter (20K Only)
1K0 819 644 B
1
Driver's Wiper Blade (Left)
5C7 955 425 B
1
Passenger's Wiper Blade (Right)
5C7 955 426 B
1
Battery
000 915 105 *
1
Battery
5K0 915 105 *
1
Battery
5GM 915 105 *
1
Drain Plug Gasket
Miscellaneous
Miscellaneous
1
1
*VIN Required
2018
Oil drain plug Torque
Wheel hub bolt Torque
Engine Code
1.4L
DGXA, DJXA
2.0L
CPLA, CPPA
1.4L
DGXA, DJXA
2.0L
CPLA, CPPA
Torque Spec
30 Nm
140 Nm
Revised 10/2/2019
© 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information
available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its
affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
2018 Jetta
2018 Jetta Service Reminder Reset
Resetting the service reminder display
If the service was not performed by an authorized Volkswagen dealer or an authorized Volkswagen
Service Facility, the service reminder can be reset as follows:
•
•
•
•
•
Switch off the ignition.
Press and hold the  button in the instrument cluster.
Switch on the ignition.
Release the  button.
One after the other, the following messages appear in the display:
Reset oil service?
Do you really want to reset
inspection?
• When you see the message for the interval you want to reset (either oil change or inspection),
confirm the request by pressing the  button in the instrument cluster. A confirmation message
appears in the display when the service reminder has been reset.
Do not reset the service reminder between service intervals; otherwise incorrect information will
be displayed.
For current fluid capacity charts, please refer to the Maintenance section in Elsa.
© 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information
available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its
affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.