20A4S4ALRDTECREP

2020
A4/S4/A4 allroad
Audi Pre-Delivery Inspection
Stock No.
Dealer Number
R.O. No.
VIN
Road test mileage out
Road test mileage in
Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle
Vehicle Preparation
Trunk Inspection (continued)
 Check Elsa for open campaigns and updates
 Check battery clamps for proper torque*
 Verify Audi phone box customer registration form is present
in vehicle and add the serial number from Elsa (if equipped).
See TSB 2051720
Interior
 Perform any open campaigns*
 Check operation of window, lock, and seat controls*
 Perform diagnostic work*
 Inspect mirrors for proper operation*
 Install front license plate carrier (if necessary)*
 Check rear view mirror operation*
Exterior
 Check all key buttons and features*
 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer
 Verify operation of all seat belts and latches
 Verify operation of all interior lights
 Verify SOS button is green and Roadside assistance button
LED will remain off. Reference TSB 2052299 if issues occur
 Verify operation of heated seats
 Verify operation of heated rear seats (if equipped)
 Verify operation of ventilated seats (if equipped)
Lighting and Windshield
 Verify proper operation of climate control*
 Test exterior lighting functions
 Inspect operation of all power outlets*
 Test windshield washers. Correct aim if necessary
 Check panoramic sunroof and sunshade operation*
Trunk Inspection
 Verify trunk is operational
 Verify the glove compartment opens and closes properly
 Verify operation of front Passenger Occupant Detection
System
 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
Settings
 Verify tool kit is installed securely in luggage compartment
 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*
 Verify inflatable spare tire and compressor are present
 Verify operation of MMI® touch
 Set spare tire pressure*
 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
Effective 10-24-2019-US
Version 1.1
PRE-DELIVERY INSPECTION (PDI) | 1
2020
A4/S4/A4 allroad
Audi Pre-Delivery Inspection
Settings (continued)
Driving Performance (continued)
 Verify Speech Dialog System is operating*
 Verify transmission operation, including shift paddles
 Set “Entertain. Fad.” in Parking aid to an audible level*
 Test drive vehicle applying brakes several times*
 Set “Music volume while parking” to medium*
 Check steering/tire alignment
 Set dealership location in navigation (if equipped)*
 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer
 Turn off Manual Speed Warning (if equipped)*
 Calibrate rear view mirror*
Media / Radio / SAT
 Verify quality of radio reception in AM/FM/SiriusXM® bands
 Verify operation of aux. input
 Insert SD card and test function of all slots
Driver Assistance
 Verify HD Radio is turned “off”*
 Verify cruise control/ACC functionality (if equipped)
Audi connect® (USA ONLY) (if equipped)
 Verify Audi side assist functionality (if equipped)
 Turn on the Wi-Fi® hotspot (if equipped)*
 Verify operation of parking system (if equipped)*
 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Verify all vehicle Head-up display functionality (if equipped)*
 Enable satellite map view for navigation (if equipped)*
 Activate NAV and follow directions back to dealership (if
equipped)
On-Hoist Inspection
Post-Road Test Inspection
 Remove transport suspension blocks (follow ELSA instruction)
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check service interval and verify correct interval is displayed
 Check underside of vehicle for fluid leaks and loose components
 Check engine oil level*
 Inspect wheel bolts for proper torque*
 Check all fluid levels and top off if necessary
 Install wheel locks (if equipped)
 Ensure the yellow tire pressure tag is installed on the steering wheel
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**
Driving Performance
 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.
Technician Signature
Effective 10-24-2019-US
Version 1.1
Last 8 of VIN
Completion Date
PRE-DELIVERY INSPECTION (PDI) | 2