122-Z5E8C-10

10/1/2019
WKD6 Workshop campaign "Re-coding control ... | PPN Portal
WKD6 Workshop campaign "Re-coding
control unit for assistance systems and reprogramming various other control units if…
Version 4
English (US)
 Overview
 Porsche Mobility
 Required so ware
 Required tools
 Warranty processing
 Scope 1: Re-coding control unit for assistance systems
 Scope 2: Re-coding control unit for assistance systems and re-programming various other control units
 Scope 3: Re-coding control unit for assistance systems and re-programming various other control units
 Further information
https://ppn.porsche.com/portal/docs/DOC-247095
1/6
10/1/2019
WKD6 Workshop campaign "Re-coding control ... | PPN Portal
WKD6 Workshop campaign - Re-coding control unit for assistance
systems and re-programming various other control units if necessary
Overview
New so ware is available for the following control units*:
- Assistance systems
- Chassis control (PASM)
- Roll stabilisation (PDCC)
- PCM 5.0
* You will nd an overview of the problems and symptoms that will be corrected with the so ware update in the Technical
Information for this campaign.
Model type
Cayenne (9YA)
Model year
2019
Manufacturing period
between 10/27/2018 and 03/21/2019
Number
6,621
Porsche Mobility
If requested, the mobility of the a ected customer can be guaranteed by o ering a suitable replacement vehicle.
Please invoice this additional service with the campaign scope via WWS.
Required so ware
PIWIS Tester 3 test so ware version
38.400.020 (or higher)
If other programming campaigns that a ect the same control unit and involve the identical procedure are open for a
vehicle in addition to this campaign, the a ected control unit must only be programmed once using the current PIWIS
Tester test so ware.
Please proceed as follows for the campaigns that have not been carried out:
Mark the campaign as 'cannot be carried out' with the reason "Modi cation of the a ected component" in PQIS. The
“Warranty relevance” ag must be activated in order to be able to set a warranty claim and close the campaign.
https://ppn.porsche.com/portal/docs/DOC-247095
2/6
10/1/2019
WKD6 Workshop campaign "Re-coding control ... | PPN Portal
A warranty claim must be submitted for the campaign in which 0 TU is entered as the speci ed working time and no
material items are speci ed.
Required tools
Designation
Part No./Speci cations/Special instructions
Battery charger
Current rating of at least 90 A and current and voltagecontrolled charge map for lithium starter batteries,
e.g. VAS 5908 - Battery charger or equivilant
PIWIS Tester 3
-
Only for campaign scope 3:
SD memory cards for PCM update
available via PiUS* or via the spare parts system as an SD
card containing data
- North America (I-no. ER3)
9Y0919360D
* From now on, you can also create the SD cards mentioned in this campaign yourself. To do this, download the so ware
for the required SD card using the SD card tool PiUS (Porsche integrated Update Service) and install it on a blank SD card.
Pay particular attention to the following:
The name of the so ware in the PiUS corresponds to the respective part number of the SD card.
For creating the SD card via PiUS, a blank or re-writable SD card is required for each individual so ware.
The so ware available in the PiUS must only be used in accordance with the instructions provided in the Technical
Information published for this purpose.
The SD cards/so ware mentioned here must only be used on the vehicles assigned to the campaign.
An exception to this can only be granted via another Technical Information.
You will nd further information on how to install and use the PiUS so ware tool in the PPN under PiUS goes live
Warranty processing
Please enter the campaign that was carried out in the Warranty and Maintenance booklet for the vehicle.
Scope 1: Re-coding control unit for assistance systems
Damage code
WKD6 66 000
Repair code
1
Working time
30 TU
https://ppn.porsche.com/portal/docs/DOC-247095
3/6
10/1/2019
WKD6 Workshop campaign "Re-coding control ... | PPN Portal
Scope 2: Re-coding control unit for assistance systems and re-programming various other control units
The following control units are re-programmed:
Chassis control (PASM)
Roll stabilization (PDCC)
Damage code
WKD6 66 000
Repair code
1
Working time
60 TU
Scope 3: Re-coding control unit for assistance systems and re-programming various other control units
The following control units are re-programmed:
PCM 5.0
Chassis control (PASM)
Roll stabilization (PDCC)
Damage code
WKD6 66 000
Repair code
1
Working time
70 TU
Further information
* Please nd enclosed the Technical Information and VIN List PDFs. Please bear in mind that this is provided for your
information only. The version published in PCSS is the de nitive version.
For further information, please get in touch with the contact:
Ryan Cooney
Senior Regulatory A airs Consultant
[email protected]
https://ppn.porsche.com/portal/docs/DOC-247095
4/6
10/1/2019
WKD6 Workshop campaign "Re-coding control ... | PPN Portal
9YA 9 47-19 WKD6 Recoding control unit for
assistance systems.pdf
353.6 KB
(261 views)
WKD6 VIN List.xlsx
295.3 KB
(16 views)
Created by Ryan Cooney on Jun 17, 2019 6:35 PM. Last modi ed by Mitchell Grasser on Aug 13, 2019
3:04 PM.
Categories: Workshop Campaigns, Cayenne
Content and Topics
Tags : 9ya, workshop campaign, mj k, wkd6
Personal
1429 Views
Manage
Create
Your Groups

Edit Pro le

Admin Console
Your Content

Change Password

PPN Administration 
Your Places


Discussion

Files

Document

Collaboration

Document
https://ppn.porsche.com/portal/docs/DOC-247095
Blog Post

Poll

Message

Event

Photo Album

Idea

Space

5/6
10/1/2019
WKD6 Workshop campaign "Re-coding control ... | PPN Portal
© 2019 Dr. Ing. h.c. F. Porsche AG. Legal notice. Copyright. Terms of
use. Privacy Policy. Cookie Policy. 011
https://ppn.porsche.com/portal/docs/DOC-247095
6/6