SC169_TSB

GROUP
MODEL
Emissions
Multiple Models
Service Campaign
NUMBER
SC169
DATE
October 2019
VOLUNTARY EMISSIONS SERVICE CAMPAIGN
ENGINE OIL FILLER CAP INSPECTION
AND/OR REPLACEMENT (SC169)
SUBJECT:
This bulletin provides the procedure to inspect and, if necessary, replace the oil filler cap on
some vehicle models listed below. The engine oil filler cap may contain a misprint of SAE
Engine Oil Viscosity Number. Follow the procedure outlined in this bulletin to replace the oil
filler cap.
Kia is requesting the completion of this Service Campaign on all affected vehicles, including
dealer stock, prior to delivery. Before conducting the procedure, verify that the vehicle is
included in the list of affected VINs.
Model
Model Year
Engine
Production
Dates
Correct Oil
Viscosity
Stinger (CK)
2018
3.3T
01/26/2018 – 03/23/2018
Sedona (YP)
2019
3.3
02/13/2018 – 02/14/2018
Cadenza (YG)
2018
3.3
02/06/2018 – 03/19/2018
Sorento (UMa)
2019
3.3
03/21/2018 – 07/10/2018
Optima (JFa)
2019
2.0T
05/22/2018 – 06/01/2018
5W-30
 NOTICE
To assure complete customer satisfaction, always remember to refer to WebDCS
Warranty Coverage (validation) Inquiry Screen (Service → Warranty Coverage →
Warranty Coverage Inquiry) for a list of any additional campaigns that may need to be
performed on the vehicle before returning it to the customer.
File Under: 
Circulate To:
X General Manager

X Service Advisors

X Technicians

X Service Manager

X Parts Manager

X Body Shop Manager 
X Fleet Repair

Page 2 of 4
SUBJECT:
ENGINE OIL FILLER CAP INSPECTION
AND/OR REPLACEMENT (SC169)
Inspection Procedure:
1. Inspect the engine oil filler cap (A).


If the cap states, “5W-30”, no further
action is required.
If the cap does not state “5W-30”,
proceed
to
the
replacement
procedure below.
A
Stinger (CK) 3.3T engine is shown above for
demonstration purposes only. Location of engine oil
filler cap may vary on different models.
Replacement Procedure:
1. Replace the engine oil filler cap (A) with
a new correctly printed cap, according to
the table on page 1 of this bulletin.
A
Sorento 3.3L engine is shown above for
demonstration purposes only. Location of engine oil
filler cap may vary on different models.
FILLING OUT AND APPLYING THE CAMPAIGN COMPLETION LABEL:
The dealer must fill in the Dealer Code and Date information fields on the Campaign
Completion Label. Once complete, affix the campaign completion label under the hood of the
vehicle, as shown below.
Apply SC169 Campaign Completion
Label onto the body in the area next to
the shock tower, as shown. NOTE: Be
sure to clean the mounting surface to
ensure proper label adhesion.
TSB: SC169 Multiple Models October 2019
SC169
Dealer Code:
Date:
Page 3 of 4
SUBJECT:
ENGINE OIL FILLER CAP INSPECTION
AND/OR REPLACEMENT (SC169)
For California, Connecticut, Maine, Maryland, Massachusetts, New Jersey, Oregon,
Pennsylvania, Rhode Island, Vermont, Washington, New York and Delaware:
VEHICLE EMISSION RECALL - PROOF OF CORRECTION CARD
A Vehicle Emission Recall - Proof of Correction card must be filled out for all vehicles
registered in California, Connecticut, Maine, Maryland, Massachusetts, New Jersey, Oregon,
Pennsylvania, Rhode Island, Vermont, Washington, New York and Delaware. Residents of
these states, who own an affected vehicle, will be required to possess a Vehicle Emission
Recall - Proof of Correction card as evidence of voluntary service campaign completion, when
they apply for vehicle registration renewal.
WHAT TO DO WITH THE CARD:
The Vehicle Emission Recall - Proof of Correction card must be completed by the Dealership's
Service Manager using a permanent ink pen. A fine point pen is recommended. When filling in
the information, copy the information directly from the vehicle, not the repair order. ALL
INFORMATION MUST BE PRINTED AND NEAT.
NOTE: DO NOT COMPLETE THE CARD UNLESS THE SERVICE CAMPAIGN WORK IS
COMPLETED.
The copy of the card shown below indicates the areas to be filled in. Each area must be filled
in. The completed card should be given to the owner of the vehicle upon completion of the
Campaign and placement of the Campaign Completion Label outlined on Page 2.
TSB: SC169 Multiple Models October 2019
Page 4 of 4
ENGINE OIL FILLER CAP INSPECTION
AND/OR REPLACEMENT (SC169)
SUBJECT:
AFFECTED VEHICLE RANGE:
Model
Production Date Range
Stinger (CK)
January 26, 2018 through March 23, 2018
Sedona (YP)
Cadenza (YG)
Sorento (UMa)
Optima (JFa)
February 13, 2018 through February 14, 2018
February 6, 2018 through March 19, 2018
March 21, 2018 through July 10, 2018
May 22, 2018 through June 1, 2018
REQUIRED PART:
Part Name
Part Number
5W-30
Engine Oil Filler Cap
26510 26630QQK
Campaign Completion Label
UT160 SC169
Vehicle Emission Recall-Proof of
Correction Card
UT161 SC000
Figure
SC 169
Dealer Code:
Date:
WARRANTY INFORMATION:
N Code: N99 C Code: C99
Model
CK, YP,
YG
UMa, JFa
Claim
Type
V
V
Causal
P/N
26510
26630
26510
26630
Repair
Description
Labor
Op Code
Op
Time
Replacement
P/N
Qty.
(SC169)
Engine Oil Filler Cap
Inspection Only
180088I0
0.2
M/H
N/A
0
(SC169)
Engine Oil Filler Cap
Inspection &
Replacement
180088R0
0.2
M/H
26510
26630QQK
1
(SC169)
Engine Oil Filler Cap
Inspection Only
180A20I0
0.2
M/H
N/A
0
(SC169)
Engine Oil Filler Cap
Inspection &
Replacement
180A20R0
0.2
M/H
26510
26630QQK
1
Qty.
0
0
 NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers
should reference SC169 when accessing the WebDCS system.
TSB: SC169 Multiple Models October 2019