LI82.20-N-054617

Interior lamp inoperative when opening door (bulb working)
Topic number
LI82.20-N-054617
Version
2
Design group
82.20 Interior lights
Date
07-19-2013
Validity
MODEL 906
Reason for change
Cause revised
Reason for block
Complaint:
Interior lamp inoperative when opening door (bulb working).
Fault codes 9042 and 90B5 set in SAM.
Cause:
SAM with flashware version 906 902 75 00.
Remedy:
Flash control unit if the following conditions are met:
•
Flashware version 906 902 75 00 in SAM control unit
•
Fault codes 9042 and 90B5 set in SAM
If the above action is unsuccessful, please create a PTSS case.
Symptoms
Overall vehicle / Lighting / Interior illumination / Interior lamp / Does not go on
Overall vehicle / Lighting / Interior illumination / Cargo area illumination / Cargo area illumination function / Does not
go on
Control unit/fault code
Control unit
Fault code
Fault text
SAMSignal acquisition and ac- 9042
tuation module (SAM906)
Front interior light-Short circuit to positive
SAMSignal acquisition and ac- 90B5
tuation module (SAM906)
N10 (SAM control unit)-Status of output stage Implausible value
((DEF@SAM_Kurzschlussfehler,DEF@SAM_Kurzschlusszaehler))
Work units
07-19-2013 4:20 PM
© Copyright Daimler AG
RGHAZIZ
Page 1/2
Op. no.
Operation text
54-1011
PERFORM QUICK TEST
Time
Damage
code
Note
54584 90
Driver-side SAM control unit - Software release
Validity
Vehicle
Engine
Transmission
Sprinter III
*
*
07-19-2013 4:20 PM
© Copyright Daimler AG
RGHAZIZ
Page 2/2