IK0800417
Service Bulletin Details
Public Details for: IK0800417
How to reboot a body controller
- 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2013
2013 IC BUS CE |
Models from 2012
2012 IC BUS CE |
Models from 2011
2011 IC BUS CE |
Models from 2010
2010 IC BUS CE |
Models from 2009
2009 IC BUS CE |
Models from 2008
2008 INTERNATIONAL CE |
Models from 2007
2007 INTERNATIONAL CE |
IK0800417 - How to Reboot a Body Controller Page 1 of 3 Countries: CANADA, UNITED STATES Document ID: IK0800417 Availability: ISIS, Bus ISIS, FleetISIS, Body Builder Revision: 0 Major System: ELECTRICAL SYSTEM Created: 2/5/2013 Current Language: English Last Modified: 2/5/2013 Other Languages: NONE Author: Matthew Boyer Viewed: 353 Less Info Coding Information Hide Details Copy Link Copy Relative Link Bookmark Add to Favorites View My Bookmarks Print Provide Feedback Helpful Not Helpful 4 0 Title: How to Reboot a Body Controller Applies To: All International Trucks Built After 2007 with a Body Controller Description If the body controller receives incorrect messages from another module, or experiences a power surge/low voltage, it may lock up. When this happens the body controller will need to be rebooted. This does not indicate that the body controller is defective. If the body controller can be rebooted, and the symptom(s) goes away, then the body controller should not be replaced. Also, before replacing a body controller, the original body controller should be rebooted, and retested to see if the symptom(s) have gone away. Rebooting a Body Controller with Diamond Logic Builder https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/4/2013 IK0800417 - How to Reboot a Body Controller Page 2 of 3 Rebooting a Body Controller without Diamond Logic Builder To reboot a body controller without Diamond Logic Builder, you need to remove all power from the body controller, and let it sit for five minutes before reconnecting the power. This can be done by either disconnecting the negative battery cables from the batteries, or disconnecting all the connectors, including the main power connector from the body controller. Related Resources IK0800411 Body Controller Resource Center Hide Details Feedback Information Viewed: 352 https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/4/2013 IK0800417 - How to Reboot a Body Controller Helpful: Page 3 of 3 4 Not Helpful: 0 No Feedback Found Copyright © 2013 Navistar, Inc. https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 3/4/2013