B663119
Service Bulletin Details
Public Details for: B663119
Rearview camera: sporadically no image is displayed. When reverse gear is selected or the rear view camera is activated, sporadically no image is displayed on the central information display (cid). If the ignition is cycled off and back on,
Models from 2019
2019 BMW 330I |
2019 BMW M850I |
2019 BMW X5 |
2019 BMW X7 |
2019 BMW Z4 |
Models from 2016
2016 BMW 740LI |
2016 BMW 750LI |
11/4/2019 66 31 19_REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED SIB 66 31 19 REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED 2019-10-23 MODEL E-Series G05 G06 G07 G14 G15 G16 G20 G29 G12 Model Description X5 Sports Activity Vehicle X6 Sports Activity Coupe X7 Sports Activity Vehicle 8 Series Convertible 8 Series Coupe 8 Series Gran Coupe 3 Series Sedan Z4 Roadster 7 Series Sedan (LCI) Production Date Affected Option Code Start 3AG – Rearview camera Of Or 5DM – Parking Assistant Production Or 5DN – Parking Assistant Plus From March 1st, 2019 SITUATION When reverse gear is selected or the rear view camera is activated, sporadically no image is displayed on the Central Information Display (CID). If the ignition is cycled off and back on, the function is restored. CAUSE Software error between the head unit and the rear-view camera. CORRECTION Program and encode the vehicle using ISTA 4.19.2x or higher (released mid-September, 2019). Target Integration Level: S18A-19-07-553 or higher PROCEDURE 1. Connect vehicle to ISTA 4.19.2x or higher. 2. Program and encode the vehicle. a. Target I-level: S18A-19-07-553 or higher Always connect a BMW-approved battery charger/power supply (SI B04 23 10) when performing programming. WARRANTY INFORMATION During this workshop visit, the affected vehicle may also show one or more programming and encoding Technical Campaign repairs open, the programming and encoding procedure may only be invoiced one time. If you have this situation, update the vehicle to the current available I-Level by performing and submitting for one of these open Technical Campaigns. Please be sure to also perform any other additional work as required by the campaign. Lastly, close any remaining open programming and encoding Technical Campaign repairs on the vehicle. To close, invoice and claim the applicable Technical Campaign repair Defect Code(s) together with the corresponding special labor operation that identifies the vehicle is or will be at the specified Target integration level or higher as part of another campaign or repair. Copyright ©2019 BMW of North America, Inc. 1/3 11/4/2019 66 31 19_REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED If there aren’t any programming and encoding Technical Campaign repairs open and the vehicle’s current Ilevel is below the Target I-level of S18A-19-07-553, then submit as follows: Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks or the BMW Certified Pre-Owned Program. Defect Code: 6653040200 Control unit TRVC/TRSVC, surround view camera (Rear Side View camera) software error / internal equipment fault Labor Operation Description 00 00 006 Labor Allowance Performing vehicle test (with vehicle diagnosis system – checking Refer to AIR faults) (Main work) Or: 00 00 556 Performing vehicle test (with vehicle diagnosis system – checking Refer to AIR faults) (Plus work) And: 61 21 528 Connect an approved battery charger/power supply (indicated in AIR as Charging battery) Refer to AIR Programming/encoding control unit(s) Refer to AIR And: 61 00 730 And, additionally for the: e-Vehicles Labor Operation Description Labor Allowance 61 25 910 Refer to AIR Recharging high-voltage battery unit (to high voltage charging socket) If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of 00 00 006. Refer to AIR for the corresponding flat rate unit (FRU) allowances. Programming and Encoding - Vehicle Control Units (RO and Claim Comments Required) The programming procedure automatically reprograms and encodes all vehicle control modules which do not have the latest software i-level. If one or more control module failures occur during this programming procedure: Please claim this consequential control module-related repair work under the defect code listed in this bulletin with the applicable AIR labor operations. Please explain this additional work (The why and what) on the repair order and in the claim comments section. Copyright ©2019 BMW of North America, Inc. 2/3 11/4/2019 66 31 19_REARVIEW CAMERA: SPORADICALLY NO IMAGE IS DISPLAYED For control module failures that occurred prior to performing this programming procedure: When covered under an applicable limited warranty, claim this control module-related repair work using the applicable defect code and labor operations in AIR (including diagnosis with separate punch times). Copyright ©2019 BMW of North America, Inc. 3/3