0809SpWgSrvXprs
Service Bulletin Details
Public Details for: 0809SpWgSrvXprs
Added: torque spec table
Models from 2009
2009 VOLKSWAGEN JETTA SPORTWAGEN |
Models from 2008
2008 VOLKSWAGEN JETTA SPORTWAGEN |
2008 – 2009 SportWagen Engine 2.0L TSI Turbo: CCTA, CBFA Miscellaneous Part Part Number Quantity Oil Filter VW 502 00 Use synthetic oil SAE 5W-40, SAE 5W-30 06J-115-403-Q 1 N/A 4.6L (4.9qt) Pollen Filter (20K Only) See Tech Tip 17-12-02 Elsa Doc #2030603 1K1-819-653-B Air Filter 1K0-129-620-D 1 Wiper Blade Set 1Q1998002 1 Rear Wiper Blade 1K9955427 1 Drain Plug Gasket 1 1 Engine Part Part Number Quantity 06D-115-562 1 2.5L 5 Cylinder: CBTA,CBUA Oil Filter VW 502 00 Use synthetic oil SAE 5W-40, SAE 5W-30 Drain Plug + Gasket N/A 6.0L (6.3qt) N-90813202 1 Pollen Filter (20K Only) 1K1-819-653-B 1 Air Filter 07K-129-620 1 Wiper Blade Set 1Q1998002 1 Rear Wiper Blade 1K9955427 1 Engine Part Part Number Quantity 071115562C 1 2.0L Turbo Diesel: CBEA Oil Filter VW 507 00 Use synthetic oil SAE 5W-30 Drain Plug Gasket N/A 4.0L (4.2qt) N-90813202 1 Pollen Filter (20K Only) 1K1-819-653-B 1 Fuel Filter (20K Only) 1K0127434A 1 Air Filter 1K0129620E 1 Wiper Blade Set 1Q1998002 1 Rear Wiper Blade 1K9955427 1 Miscellaneous Miscellaneous © 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. 2008 – 2009 SportWagen 2008-2009 Oil drain plug Torque Wheel hub bolt Torque Engine Code Torque Spec 2.0L CCTA, CBFA 2.5L CBTA, CBUA 2.0L TDI CBEA 2.0L CCTA, CBFA 2.5L CBTA, CBUA 2.0L TDI CBEA 30 Nm 120 Nm Revised 11/11/2019 Resetting the service interval display If the schedule maintenance service was not done by a Volkswagen dealer, the service interval display function must be reset as follows: • With the ignition off, press and hold the 0.0 trip odometer reset button. • Switch the ignition on. The service interval function is now in reset mode. • Let go of the 0.0 button and, within 20 seconds, briefly press the m clock reset button • After a short time, the screen switches back to the normal display. The reset mode is cancelled if the m button is not pressed within 20 seconds, or if the vehicle is driven before resetting is complete. Tips • Do not reset the service interval function between scheduled maintenance intervals; doing so will result in an incorrect display. • There are different instrument clusters for different models. Equipment and displays may vary. © 2019 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.